Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

td42 turbo manifold.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 89
Joined: Sun May 04, 2008 7:33 am
Location: Melbourne, Croydon

td42 turbo manifold.

Post by Devious »

Hey guys, after todays towing adventure, i have decided the td42 needs a turbo whacked on.

But, I cant get a hold of a manifold and any wrecker I have rang, they will only sell me a complete engine.

Does anyone know where I can get a manifold from in Melbourne? Or perhaps anyone have one laying around they want to sell??

Thanks.
1991 GQ lwb 4.2diesel.
33"Bighorns, ARB deluxe winch bar,sliders, brush bars, spotties, snorkel, lift...........
And now with TURBO LOVE!
AS SEEN ON YOUR RIG, 4WD TV EP 191...
Top
Posts: 129
Joined: Tue Apr 01, 2008 8:39 pm
Location: Warrnambool

Post by GQ4.2 »

send OONDY a pm on here, I think he can get DTS manifold for around $450
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

you can buy the turboglide highmount manifolds for about 510 to your door from them direct, eastern turbocharges wanted 750 for one! :roll: :roll:
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Get one off a GU?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Get one off a GU?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Get one off a GU?
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 89
Joined: Sun May 04, 2008 7:33 am
Location: Melbourne, Croydon

Post by Devious »

The GU ones are hard to come by, wreckers wont sell them on their own.

I might try that AXT place in Dandenong see what they charge.
1991 GQ lwb 4.2diesel.
33"Bighorns, ARB deluxe winch bar,sliders, brush bars, spotties, snorkel, lift...........
And now with TURBO LOVE!
AS SEEN ON YOUR RIG, 4WD TV EP 191...
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

apparently nissan sell high mount manifolds to suit the LHD TD42T and were about $800. I would go with a DTS lowmount from MTQ unless looking to run a "BIG" turbo.
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

yeah goodluck finding a gu one. i had that lovely experisnece a few weeks back.
Top
Posts: 295
Joined: Sun Sep 24, 2006 5:34 pm

Post by azzad »

big bundy wrote:you can buy the turboglide highmount manifolds for about 510 to your door from them direct, eastern turbocharges wanted 750 for one! :roll: :roll:
When I rang them they wouldnt sell me just a manifold.
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

I bought mine from them, sometime ago though.
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

azzad wrote:
big bundy wrote:you can buy the turboglide highmount manifolds for about 510 to your door from them direct, eastern turbocharges wanted 750 for one! :roll: :roll:
When I rang them they wouldnt sell me just a manifold.
try again i guess? i was just a random and he posted it to my door down to melbourne from sydney!
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Give MTQ a call. Last year they quoted me $330 + gst for one.
SWB mav. Some mods.
Top
Posts: 50
Joined: Fri Jan 13, 2006 8:05 pm
Location: vic

Post by big scotty »

as dansedgli said get a mtq they make good power to
45's v 8 turbo the way to go
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

thats a damn good price dan
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 89
Joined: Sun May 04, 2008 7:33 am
Location: Melbourne, Croydon

Post by Devious »

MTQ huh......where are they? Any contact details?
1991 GQ lwb 4.2diesel.
33"Bighorns, ARB deluxe winch bar,sliders, brush bars, spotties, snorkel, lift...........
And now with TURBO LOVE!
AS SEEN ON YOUR RIG, 4WD TV EP 191...
Top
Posts: 50
Joined: Fri Jan 13, 2006 8:05 pm
Location: vic

Post by big scotty »

they are in dandy south on hammond road
45's v 8 turbo the way to go
Top
Posts: 89
Joined: Sun May 04, 2008 7:33 am
Location: Melbourne, Croydon

Post by Devious »

Ahhk cool.

Ill look em up.
1991 GQ lwb 4.2diesel.
33"Bighorns, ARB deluxe winch bar,sliders, brush bars, spotties, snorkel, lift...........
And now with TURBO LOVE!
AS SEEN ON YOUR RIG, 4WD TV EP 191...
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Devious wrote:Ahhk cool.

Ill look em up.
Or if you have no luck with them, PM oondy on here - he'll do you a good price and is very efficient.

Dieseltec can help you with water/oil lines in a complete bolt-on kit form. (VERY handy).
Top
Posts: 9
Joined: Wed Jan 02, 2008 9:11 pm
Location: rowville

Post by mix4x4n »

Racetec in dandenong make a top mount turbo manifold for tb and td42 .Was pretty pricey though $950 and an extra $400 if you wanted it ceramic coated but with that said you also have to make a custom dump pipe blah blah blah
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

dansedgli wrote:Give MTQ a call. Last year they quoted me $330 + gst for one.
Hmm it appears times have changed.

I emailed them today because Im after one and they wanted $600+gst. :(

pm has been sent to oondy, hopefully he can help me out.
SWB mav. Some mods.
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

Devious wrote:MTQ huh......where are they? Any contact details?
google is your friend
http://www.mothfukle-engineering.com/
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

dansedgli wrote:
dansedgli wrote:Give MTQ a call. Last year they quoted me $330 + gst for one.
Hmm it appears times have changed.

I emailed them today because Im after one and they wanted $600+gst. :(

pm has been sent to oondy, hopefully he can help me out.
Probably wouldn't help that (quite possibly after the group buy :? ) they are now easily available (eBay). Supply and demand i spose.

I have a brand spaking new one here i'll sell to you for $599.95 ex GST.... ;)

(not really, i'm keeping it) I should have bought a few from the group buy, cause now i'd be able to resell them and go on holiday with the profits.
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Yeah its a bit of a pain. I had one and decided to sell it a few years back. That was $340 or so. Then I got the quote for another for $330 + gst so didnt rush to get one with your group buy. Now the prices go up :(

I think at $660 I would rather spend the extra cash and get a 6boost or etm manifold made up for a few hundred more.

Im sure a 2nd hand one will pop up somewhere.
SWB mav. Some mods.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

They do every couple of weeks. I've also noticed a few complete turbo kits about the place too (mainly eBay).
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

I'm thinking of selling my extractor style manifold that was custom made by Sandy Bowman at Aust4x4.

Anyone interested let me know (brand new)
GQII Patrol YAY!!
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

dansedgli wrote:
dansedgli wrote:Give MTQ a call. Last year they quoted me $330 + gst for one.
Hmm it appears times have changed.

I emailed them today because Im after one and they wanted $600+gst. :(

pm has been sent to oondy, hopefully he can help me out.

was talking to our local MTQ today. $660 is retail. trade is $440.
http://www.mothfukle-engineering.com/
Top
Posts: 5
Joined: Sun Sep 28, 2008 8:21 am
Location: Brisbane

Post by Waddy »

Is the MTQ one a high mount or low mount?? Im looking for a manifold to but dont want to pay $600 or so but $440 isnt to bad i would buy one for that i should know someone that can get trade for me :)
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

MTQ is a low mount.
Top
Posts: 129
Joined: Tue Apr 01, 2008 8:39 pm
Location: Warrnambool

Post by GQ4.2 »

hey coxy whats the chance of you and oondy doing another group buy?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 95 guests