Hey guys,
I posted this question earlier today in the auto electrical section, but since it has only had a dozen views i guess not many members look in that section.
So since my issue needs to be dealt with rather hstily, here is the link.
If you know anything at all about this topic, please lend a hand.
Cheers
Daniel
http://www.outerlimits4x4.com/ftopic160926.php
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Uhf Aerials?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Uhf Aerials?
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
http://www.outerlimits4x4.com/ftopic147700.php
Antenna design theory is very complicated.
There are lots of variables that change the gain.
To simplify - the gain of an antenna is rated over a theoretical ‘0’db gain antenna called an isotropic radiator.
Vertical ‘stick’ antennas are limited in the amount of gain they can produce, it is dependent on:
The design - ¼ wave / ½ wave / 5/8 wave (the physical length of wire used to make the antenna) and the ground plane – mounting position on the metal (vehicle)
Quality of construction, thickness of wire ect etc also plays a part.
One way to produce gain is to make the radiation pattern directional.
This theoretical gain (its radiation pattern) is then highly dependent on its ‘ground plane’ – the metal it is mounted to.
Dick Smith staff would not be able to advise you, but I do not think they sell junk antennas – the brands I have seen there are reputable.
An a radio engineer… my advice would be to mount the antenna as high as you can on the vehicle and make sure the base has a good connection to metal.
The ‘lobe’ – direction of gain of the antenna – should then be front to back / elongated in the direction you are travelling.
If you wanted a more omnidirectional radiation pattern – ideal for twisted mountain roads, then you might be slightly better with less gain antenna that has a a less directional lobe.
Read this slowly so it sinks in – Provided it is installed correctly, the biggest influence on antenna performance is height!
I have designed and built my own mobile antenna - a base loaded 5/8 wave ground plane antenna, (it has the lowest angle of radiation) and mounted it mid point at the highest part of the vehicle.
- My 2 bobs worth
Dave
There are lots of variables that change the gain.
To simplify - the gain of an antenna is rated over a theoretical ‘0’db gain antenna called an isotropic radiator.
Vertical ‘stick’ antennas are limited in the amount of gain they can produce, it is dependent on:
The design - ¼ wave / ½ wave / 5/8 wave (the physical length of wire used to make the antenna) and the ground plane – mounting position on the metal (vehicle)
Quality of construction, thickness of wire ect etc also plays a part.
One way to produce gain is to make the radiation pattern directional.
This theoretical gain (its radiation pattern) is then highly dependent on its ‘ground plane’ – the metal it is mounted to.
Dick Smith staff would not be able to advise you, but I do not think they sell junk antennas – the brands I have seen there are reputable.
An a radio engineer… my advice would be to mount the antenna as high as you can on the vehicle and make sure the base has a good connection to metal.
The ‘lobe’ – direction of gain of the antenna – should then be front to back / elongated in the direction you are travelling.
If you wanted a more omnidirectional radiation pattern – ideal for twisted mountain roads, then you might be slightly better with less gain antenna that has a a less directional lobe.
Read this slowly so it sinks in – Provided it is installed correctly, the biggest influence on antenna performance is height!
I have designed and built my own mobile antenna - a base loaded 5/8 wave ground plane antenna, (it has the lowest angle of radiation) and mounted it mid point at the highest part of the vehicle.
- My 2 bobs worth
Dave
80 series Extra Cab - a work in progress.
Who is online
Users browsing this forum: No registered users and 94 guests