Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1jzgte into 75 series

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 8
Joined: Sat Sep 13, 2008 12:09 am
Location: brisbane

1jzgte into 75 series

Post by roadrageimports »

has anyone done this conversion b4 or knows where you can buy adaptor kits for it? i have a 1jzgte sitting on the floor and a spoa cruiser siting in the yard just wondering if anyone could shed a little info on this for me
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

mate I don't know much about that motor but I have an adaptor plate here to suit 3sgte to 1hz 5 speed (h55 box) in case the pattern is the same


cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

bru21 wrote:mate I don't know much about that motor but I have an adaptor plate here to suit 3sgte to 1hz 5 speed (h55 box) in case the pattern is the same


cheers bru
3sgte that's the celica 4cyl engine yeah ? can't imagine bolting that up to a 1HZ box in a cruser, there'd be a lot of spare room, seems like an odd combination to have an adapter plate for :?:
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 218
Joined: Tue Jan 16, 2007 9:28 pm

Post by tuffsahara »

the 3s-gte were out of the import sw20 mr2's or the gt4 celica's they are the turbo motor pretty odd to bolt one into a landcruiser maybe someone was gonna use a cruiser box in somthing else
Top
Posts: 205
Joined: Sat Jun 28, 2008 3:55 pm
Location: South Brisbane

Post by phil94delica »

Im sure there is a white hilux with blue stripes thats getting around Victoria Pt area that has a 1J turbo in it. I dont know if it ever hits the dirt but it is quick.

It would be a good conversion. Marks adaptors seems to have all sorts of adaptor kits.
Electrical !!!
www.philthesparky.com.au

Offroad Photography !!!
www.offroadphotography.com.au
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

oozuk wrote:
bru21 wrote:mate I don't know much about that motor but I have an adaptor plate here to suit 3sgte to 1hz 5 speed (h55 box) in case the pattern is the same


cheers bru
3sgte that's the celica 4cyl engine yeah ? can't imagine bolting that up to a 1HZ box in a cruser, there'd be a lot of spare room, seems like an odd combination to have an adapter plate for :?:
I'm guessing you read that the wrong way around :finger:
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

not a bad combination - 3sgte to 1hz 5 speed.

I was planning to run it in a jimny, after seeing the thai guys at OBC.

the 1hz 5 speed is a pretty strong box and is very short making for good front mid engine layout. the spline on the box matches the 3sgte clutch plate too.

I had the adaptor built.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests