Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to remove instrument cluster of 40series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

How to remove instrument cluster of 40series?

Post by twr7cx »

How do I remove the instrument cluster? There's 2 machine screws there which I undid, and it moved out somewhat, but I didn't want to force it out incase there's something else (e.g. cables/wires etc.) still holding it in.

Image
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Yank it. There will be a speedo cable hooking up and some plugs.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 13
Joined: Wed Jan 31, 2007 6:59 pm
Location: sunshine coast

dash 45

Post by ol' 45 »

there are two lugs on cluster that hook over the bottom edge. Prise the top awayfrom the dash about 10-15mm and try and slide the whole thing skyward a little and then pull out.

As mentioned you will have spedo and cables.
Top
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

Post by twr7cx »

Cheers, I'll have another crack tomorrow.
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

you will need to unclip the speedo cable first by reaching up from under the dash then you will be able to remove it enough to remove the electical plugs
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests