Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 litre into a GQ Exhaust question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 28
Joined: Fri Aug 27, 2004 11:29 am
Location: Sydney

5 litre into a GQ Exhaust question

Post by Nigel »

Hi to the forum
I am fitting a 5 litre VT commodore motor to my GQ.
I have the HSV extractors and my question is what size exhaust system have people that have performed this conversion run and how many cats.
I have spoken to three different exhaust shops and so far been told two and a half inch, three inch and three and a half inch with varying options on weather to run one or two cats.
The motor is a stock 179kw 5 liter.
And help and experience appreciated.


Regards
Nigel
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i have a 5.7 and it uses a single 3" pipe with 1 cat 1 muffler, sounds very nice not super loud but everyone knows its a v8
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

i'd go with a single 2.5inch system with one good cat.

any more on a stock engine is a waste of money
http://www.mothfukle-engineering.com/
Posts: 139
Joined: Fri Apr 13, 2007 3:18 pm
Location: Melbourne

Post by 1TUFFGQ »

I can tell you that if anyone tells you to get high flow cats they don't know what they are talking about. I know a ten second street car that runs standard cats. I can put a link up to his car if you like. A 2.5 inch system with 1 cat and a resonator will be all you need. It will still sound tuff and you will get that sweet 304i sound.
GU Patrol intercooled TD42T, lifted, Cheezy sliders, ARB air locker, beadlocked Claws, Warn winch
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

1TUFFGQ wrote:I can tell you that if anyone tells you to get high flow cats they don't know what they are talking about. I know a ten second street car that runs standard cats. I can put a link up to his car if you like. A 2.5 inch system with 1 cat and a resonator will be all you need. It will still sound tuff and you will get that sweet 304i sound.

that would depend on what car it is. some cars have very restrictive cat converters on them. while others have more flow then they will ever need.

Generaly, if you are starting a system from scratch, an average priced cat that has the right sized inlet and outlet is all you need.
http://www.mothfukle-engineering.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests