Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gu turbo into gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 72
Joined: Sat Aug 05, 2006 7:52 pm
Location: Sunny Coast

gu turbo into gq

Post by Josh085 »

Bought a complete turbo kit from a 05 gu 4.2 but whilst installing it on a 93 gq the 3inch denco dump pipe hits on the oil pump release valve any ideas on various dump pipes to fit or someone who can make one on the sunshine coast??
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

should be same motor on the exterior, Can you re position the dump and turbo with the clearance in the bolt holes? Can you post pics?

I fitted gu kit to the girls gq and all fitted staight up, its running a rage 3" exhaust and dump. and there is quite a bit off clearance.
Posts: 72
Joined: Sat Aug 05, 2006 7:52 pm
Location: Sunny Coast

Post by Josh085 »

Will get some photos up. there is no clearance in the bolt holes to move things around it hits the pipe by about 15mm its not even close
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests