Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Prop Valve for Disc Brake Rear

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Prop Valve for Disc Brake Rear

Post by greg »

Team,

Is it accepted that everyone just buys prop valves from Spidertrax (or Low Range Offroad) or is there some other clever place i should be getting one from?

Thanks,
Greg
DMA Founding Member #1 - Now Retired
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Rumor has it that the prop valve used on Mini rears will do the job - but haven't tried one.

Its on the drivers side rear subframe and given the possible low cost nature of the beast should be worth a look. Almost stripped one as a "piece of interest" from a Mini at Centre Rd Self Serve Wreckers... but its gone now.

Appears to be adjustable under a screw off cap.

If you try it let us know if/how it works. - A mini forum might confirm this.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Jegs have a range of prop valves as well Greg.

Jegs High Performance - Proportioning Valve
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Thanks for the replies team.

I'm a bit cautious of using the mini prop valve idea though... it would clearly break the "if not suzuki, completely custom" rule.
DMA Founding Member #1 - Now Retired
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

yep, Ive seen a mini prop valve converted to adjustable. It had a hole taped through the cap with a little "T" handle threaded through it to work the valve inside.
Try the VIC or NSW Mini Car clubs for info.
Also try RPM race gear.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

mine was from rocket industries i think it was.

got it online.

what discs u using?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 166
Joined: Mon Dec 27, 2004 10:21 pm
Location: BrisBane Queensland Au

Post by tanshi »

i have heard the mini one working too, but it has to be from a specific type of mini as not all of them were adjustable. Im using machined down sierra disks and ford corsair calapers and have no need to a valve at all as there is no locking of the rear wheels
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

VPW should be another source - I think they stock wilwood.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: Prop Valve for Disc Brake Rear

Post by Guy »

greg wrote:Team,

Is it accepted that everyone just buys prop valves from Spidertrax (or Low Range Offroad) or is there some other clever place i should be getting one from?

Thanks,
Greg
How much is the spidertrax one ?
You know it will work if not to many $$ I would simply buy it and drive.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

VPW have them in stock for $63

Obviously owner supplies their own two little bits of hard line, but to get the whole thing for about the cost of shipping the spendertrax item is a win I think.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

nicbeer wrote:what discs u using?
Sierra fronts...

It's not for me though - it's for a friend that actually has a car that gets driven.
DMA Founding Member #1 - Now Retired
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Gwagensteve wrote:VPW have them in stock for $63

Obviously owner supplies their own two little bits of hard line, but to get the whole thing for about the cost of shipping the spendertrax item is a win I think.

Steve.
I think i endup up at about $160ish AUD for the spidertrax unit (shipped)... our dollar is just not strong enough at the moment...

$160 less the $63 for VPW's willwood unit still leaves me with $97.

That should be enough to cover the cost of 2 double flares...
DMA Founding Member #1 - Now Retired
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

Castlemain Rod Shop is clearing some out the moment. Look like strange or wilwood.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests