Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

22r Bundera

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 206
Joined: Wed Jan 18, 2006 5:55 pm
Location: Townsville, QLD

22r Bundera

Post by hutzi*RJ70*bundera »

ok so i had to pull the head off the 22r and get it machined and cleaned up, i put everything back together, timed it up bout 8 degress advance, now it runs very well just wont idle, im thinking i have some vacume lines muddled up, anyone with any ideas???
cheers
Top
Posts: 207
Joined: Thu Sep 20, 2007 4:37 pm
Location: victoria

Post by johno88 »

we changed the timing chain the other day on my hilux as it had jumped a tooth. the timing is set to 8 degress also and mine runs shit on idle but runs well high up in the revs. we made sure that all the vacume lines were correctly put back. so i have no idea sorry
Top
Posts: 206
Joined: Wed Jan 18, 2006 5:55 pm
Location: Townsville, QLD

Post by hutzi*RJ70*bundera »

yeah mine runs great to, but when you let it return to idle, it dies, and all my vaccume lines are accounted for, just maybe not all in right place!! could it be that a jet in the carby is blocked????
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

Did you plug the fuel shut off soliniod back in (the wires to the carby)or it may be faulty

Otherwise the carby idle circuit may be blocked (jet or small hole)
some thing may have dislodged while the carby was off upsidedown or on its side etc.
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests