Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Frozenboost Intercooler
Frozenboost Intercooler
Saw these on here a few months ago now, www.frozenboost.com Intercoolers. Not too many people running them, but apparently they fitted into the GQ (with aircon) fairly well, so I decided what the hell I'll buy one. Great mob to deal with, will answer emails very promptly and were not hesitent at all to sort out the drama of forgeting to send the pump with the kit! But with no questions asked the pump was in transit the next day after querying them about the mix up.
Quality looks decent, and the price is fairly appealing to about $550 US for all the gear you need, time will tell.
Now the fun begins, trying to fit the bloody thing into the vehicle.
First up the radiator is awkward due to the lines for the aircon (not sure if every modle is like this my GQ is an 89), also the bonet catch needs trimming with the grinder along the bottom.[img]http://i498.photobucket.com/albums/rr34 ... ge0015.jpg
[/img]http://i498.photobucket.com/albums/rr34 ... ge0016.jpg
[img]http://i498.photobucket.com/albums/rr34 ... ge0017.jpg
[/img]http://i498.photobucket.com/albums/rr34 ... ge0018.jpg
Fit in, but grill requires some trimming. Used the angle grinder to trim the bottom off grill, and the a dremell to remove plastic from inside the grill. Will also have circular sections removed for the rear of the thermo fan motors. (I'll post pics later of the finished result).
[img]http://i498.photobucket.com/albums/rr34 ... ge0018.jpg
Now temp fitted the intercooler, its a type 3. same side 700cfm unit. Bought the silcon elbow off the site too, cheap as chips compared to Super-Crap.
[/img]http://i498.photobucket.com/albums/rr34 ... ge0020.jpg
[img]http://i498.photobucket.com/albums/rr34 ... ge0022.jpg
3" to 2.5" reducer, probably could go a 3 to 2.75 tho. Pain in the ass to fit, stretched heaps.
[img]http://i498.photobucket.com/albums/rr34 ... ge0023.jpg
Hopefully the week after New Years, will have it all finished and give it a run to record some egt's, and charge intake temps.[/img]
Quality looks decent, and the price is fairly appealing to about $550 US for all the gear you need, time will tell.
Now the fun begins, trying to fit the bloody thing into the vehicle.
First up the radiator is awkward due to the lines for the aircon (not sure if every modle is like this my GQ is an 89), also the bonet catch needs trimming with the grinder along the bottom.[img]http://i498.photobucket.com/albums/rr34 ... ge0015.jpg
[/img]http://i498.photobucket.com/albums/rr34 ... ge0016.jpg
[img]http://i498.photobucket.com/albums/rr34 ... ge0017.jpg
[/img]http://i498.photobucket.com/albums/rr34 ... ge0018.jpg
Fit in, but grill requires some trimming. Used the angle grinder to trim the bottom off grill, and the a dremell to remove plastic from inside the grill. Will also have circular sections removed for the rear of the thermo fan motors. (I'll post pics later of the finished result).
[img]http://i498.photobucket.com/albums/rr34 ... ge0018.jpg
Now temp fitted the intercooler, its a type 3. same side 700cfm unit. Bought the silcon elbow off the site too, cheap as chips compared to Super-Crap.
[/img]http://i498.photobucket.com/albums/rr34 ... ge0020.jpg
[img]http://i498.photobucket.com/albums/rr34 ... ge0022.jpg
3" to 2.5" reducer, probably could go a 3 to 2.75 tho. Pain in the ass to fit, stretched heaps.
[img]http://i498.photobucket.com/albums/rr34 ... ge0023.jpg
Hopefully the week after New Years, will have it all finished and give it a run to record some egt's, and charge intake temps.[/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0015.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0016.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0017.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0019.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0020.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0022.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0023.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0016.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0017.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0019.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0020.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0022.jpg[/img][/img]
[img][img]http://i498.photobucket.com/albums/rr34 ... ge0023.jpg[/img][/img]
watch your engine temps closely with all that clobber in front of the radiator and probablly a boost/fuel increase plus winch, spotties and bar already there!!
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Feenz, perfect timing - I've just bought a kit from ebay for my 89 TD 42 and will be fitting it in the NY. Only difference is I'll be fitting a high mount turbo and a Donaldson, rather than having that big air filter casing on top of the engine.
A question - did you leave the fan in front of the aircon condenser or move it to the FB radiator, seeing as there are 2 mounted there?
And did you get a remote filler cap in the kit?
Look forward to watching your efforts. Thanks in advance
A question - did you leave the fan in front of the aircon condenser or move it to the FB radiator, seeing as there are 2 mounted there?
And did you get a remote filler cap in the kit?
Look forward to watching your efforts. Thanks in advance
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
i run the ZD30 air filter housing with duel battries, depending on your battry tray its either bolt up or mod stuff,coxy321 wrote:I agree! And post pics of how it all fits in with your dual batteries!ozy1 wrote:while your at it mate, id go and get yourself a GU air box from either a ZD30 or an RD28t, it will give you heaps more room without the cast air box sitting over the motor,
with ARB tray, which i have, i had to move the tray rearward about 50mm, this also incolved reshaping the inner guard to suit the shape of the overflow bottle as its an odd shape, but once done it was sweet,
Yeah I'm tending toward the idea of the 3.0L airbox, but it wont be just yet, as I'm planning to a heap of camping this summer instead of tinkering in the garage.
Yes I did get the remote filler cap, I'll put up some pics in the next few days, as I've been welding and drilling brackets today (getting close to being finished) and just started to fit all the plumbing. As for the aircon fan, its a crap little 7", so one of those larger fans will come into play in the aircon elec. circuit as well as for the intercooler system.
Any ideas on that? Does that little aircon fan serve much purpose? Never seen my one on, so im assuming it's temp activated??
Should have it done after Christmas now, nearly finished.[/quote]
Yes I did get the remote filler cap, I'll put up some pics in the next few days, as I've been welding and drilling brackets today (getting close to being finished) and just started to fit all the plumbing. As for the aircon fan, its a crap little 7", so one of those larger fans will come into play in the aircon elec. circuit as well as for the intercooler system.
Any ideas on that? Does that little aircon fan serve much purpose? Never seen my one on, so im assuming it's temp activated??
Should have it done after Christmas now, nearly finished.[/quote]
It is supposed to come on as soon as you put the AC on. You would be surprised how much the little stock fan helps the AC system transfer heat. When your car is stopped (in traffic or whatever), there is bugger all air flow, and the AC system can only cool down in direct relationship as to the heat it can dissipate on its hot side.Feenz wrote:Any ideas on that? Does that little aircon fan serve much purpose? Never seen my one on, so im assuming it's temp activated??
I've never seen either of mine on, either.(I've got 2 GQs) Must have a bit of a poke around.
Feenz, on Patrol4X4.com I've started a thread on this topic and the suggestion was made that the frozenboost system will be hard to bleed because the inlet and outlet are half way down the ic. Have you thought/done anything about that?
Feenz, on Patrol4X4.com I've started a thread on this topic and the suggestion was made that the frozenboost system will be hard to bleed because the inlet and outlet are half way down the ic. Have you thought/done anything about that?
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
I was having a think about that last night over a few beers. One way would be to drill a hole in the top at one end and tap it, then just pump through fluid with the vehicle jacked up a little at the appropriate end. Or even easier is once every thing is hooked up, stand the intercooler vertical and bleed it back to the remote filler. Im tending toward the adding a plug on top so it can be checked occasionally without having to unbolt the intercooler.
Well put it all together on Monday, took it for a drive and the injectors let go. They're 90K old and non-turbo spec I think, buckets of white smoke (not the turbo seals). Renew them next week hopefully. So no 4B'ing up at Cairns as planned. And it's the raining non-stop with mud everywhere, so just got back from doing the touristy stuff with the missus instead.
So far, minus one braket and a tapped bleed plug. The L/H thermo will fit without trimming but it's a piece of crap compared to the R/H Davies craig 10", which required trimming. It was a massive PITA so I just cut out a rectangle section between the out verticle ribs, will make a custom screen later. Also that's a Johnson 550GPH bilge pump, as the kit one still hasnt rocked up.
The little copper elbows are $3 from Bunnings.
Oil seperator, to keep out the blow-by from the cooler.
So far, minus one braket and a tapped bleed plug. The L/H thermo will fit without trimming but it's a piece of crap compared to the R/H Davies craig 10", which required trimming. It was a massive PITA so I just cut out a rectangle section between the out verticle ribs, will make a custom screen later. Also that's a Johnson 550GPH bilge pump, as the kit one still hasnt rocked up.
The little copper elbows are $3 from Bunnings.
Oil seperator, to keep out the blow-by from the cooler.
Um injectors dont just let go? weirdFeenz wrote:Well put it all together on Monday, took it for a drive and the injectors let go. They're 90K old and non-turbo spec I think, buckets of white smoke (not the turbo seals). Renew them next week hopefully. So no 4B'ing up at Cairns as planned. And it's the raining non-stop with mud everywhere, so just got back from doing the touristy stuff with the missus instead.
So far, minus one braket and a tapped bleed plug. The L/H thermo will fit without trimming but it's a piece of crap compared to the R/H Davies craig 10", which required trimming. It was a massive PITA so I just cut out a rectangle section between the out verticle ribs, will make a custom screen later. Also that's a Johnson 550GPH bilge pump, as the kit one still hasnt rocked up.
Oil seperator, to keep out the blow-by from the cooler.
And how do you get blow by oil in the IC coolant?
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Yeah I'm no diesel specialist by any means, but a friend that is was fairly convinced an injector or a few are on the way out. The injector pump is on 50K out of rebuild and turbo seals are fine, engine has done 90K, not much else it can be. It smokes under boost and at idle (white). As for the oil seperator it's on the EGR line from the rocker cover, as blow by gets into the intake and oils the internals, meaning the air core of the intercooler may be therotically less effiecient, I just don't want to clean it really.
Feenz, it just might be that filter on the hose from your rocker cover causing that white smoke. I fitted a catch can into that line on my ute because the suction from the turbo was sucking oil vapour into my turbo etc and as soon as I fitted it, the engine started blowing heaps of smoke, especially at idle. Took it out, smoke stopped. Gotta be worth a try, eh?
Thanks for the photos, BTW. Very useful. It looks kinda mean with that hole in the grille, I gotta say...
I'm going to try and space my grille out a bit, rather than cut it up. We shall see.
Thanks for the photos, BTW. Very useful. It looks kinda mean with that hole in the grille, I gotta say...
I'm going to try and space my grille out a bit, rather than cut it up. We shall see.
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
definatly could be the pcv they are sensitive things on nissan diesels they hate too much back pressure
when i got my old wagon it was vented to a tube that dumped oil onto the front tail shaft so i tried to put a catch can on it and it pumped white smoke so i took it off and left it as it was problem solvered
when i got my old wagon it was vented to a tube that dumped oil onto the front tail shaft so i tried to put a catch can on it and it pumped white smoke so i took it off and left it as it was problem solvered
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
Yep it was the moisture trap. Problem gone
34* 70% humidity today, normally fairly slugish before, now it just powers through, the only thing holding it back is the flow. I've got a 2.5" exhaust with squashed bends, fixing that up through the week. Dragged a new 3L Hilux neck and neck on 35's to about 90km/hr and had to slow down. Time to get a temp probe.
No probs with the pics Burra, just give me a buz if you want anything else specific.
34* 70% humidity today, normally fairly slugish before, now it just powers through, the only thing holding it back is the flow. I've got a 2.5" exhaust with squashed bends, fixing that up through the week. Dragged a new 3L Hilux neck and neck on 35's to about 90km/hr and had to slow down. Time to get a temp probe.
No probs with the pics Burra, just give me a buz if you want anything else specific.
That's fantastic, Feenz, so glad I was able to help. These forums are definitely the duck's guts!!!
How did you end up bleeding the IC? And I assume you are pumping from the bottom of the radiator, yes? And how did you wire up the pump and fans - are you using a thermal switch to trigger it when it gets to a certain temp?
So what exactly was the difference you've noticed with the IC fitted?
Can't wait to get into mine - just gotta finish a few earners I've got going ATM....
How did you end up bleeding the IC? And I assume you are pumping from the bottom of the radiator, yes? And how did you wire up the pump and fans - are you using a thermal switch to trigger it when it gets to a certain temp?
So what exactly was the difference you've noticed with the IC fitted?
Can't wait to get into mine - just gotta finish a few earners I've got going ATM....
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
Yeah your not wrong Burra, the forum is a good thing, helps so many times.
Yep it's pumping from the bottom, those bilge pumps wont pull water they only push it from a head of pressure. ATM the fans are on a switch and the pump is relayed to ignition. Waiting to finish holidays then I'm going to fit an air temp probe and water temp probe, then will test for abit. Most likely I'll use water temp to trigger the fans.
Primming was a bitch, had to tilt the whole unit vertical and bleed from there took a while to get the air out, and im not sure if its 100% gone. Im going to put a bleed/fill plug on top soon.
Over all makes a fair bit more power, 35's were abit sluggish before, now it's like being back on 33's with more pull at 7-10psi. Awesome straight line power offroad, it's raining heaps up here and on a dirt track spins the wheels though every gear.
Here's some better pics of the grill, I don't think it looks too bad.
Any ways good luck.
Yep it's pumping from the bottom, those bilge pumps wont pull water they only push it from a head of pressure. ATM the fans are on a switch and the pump is relayed to ignition. Waiting to finish holidays then I'm going to fit an air temp probe and water temp probe, then will test for abit. Most likely I'll use water temp to trigger the fans.
Primming was a bitch, had to tilt the whole unit vertical and bleed from there took a while to get the air out, and im not sure if its 100% gone. Im going to put a bleed/fill plug on top soon.
Over all makes a fair bit more power, 35's were abit sluggish before, now it's like being back on 33's with more pull at 7-10psi. Awesome straight line power offroad, it's raining heaps up here and on a dirt track spins the wheels though every gear.
Here's some better pics of the grill, I don't think it looks too bad.
Any ways good luck.
Thanks for all your efforts, Feenz. Much appreciated.
It'll be a while till I get onto mine but I know a lot more than I did before. Would you mind posting details of your wiring setup when you've finished it? I was planning on using one of those Jaycar thermo switches on the IC body to trigger the pump and fans, plus possibly fitting a temp gauge into that hole at the bottom of the rad to keep an eye on things.
Cheers M8
It'll be a while till I get onto mine but I know a lot more than I did before. Would you mind posting details of your wiring setup when you've finished it? I was planning on using one of those Jaycar thermo switches on the IC body to trigger the pump and fans, plus possibly fitting a temp gauge into that hole at the bottom of the rad to keep an eye on things.
Cheers M8
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
Yeah it's getting heaps of heat soak, although the radiator inlet is very hot and the bottom section is cold and the air flow at rear isn't that warm, probably over-kill. lWhen I get back to work I'll knick some turbine heat sheild, its awesome stuff, should fix that. Anyway just got back from towing the boat up the coast along the beach, all that I can say is it hauls ass now, doesn't get hot on the sand anymore. Massive difference, very impressed, awesome improvement in power/for-money.
Just finishing up Marin's intercooler install.
We used a late Telstar radiator with custom end tanks and Spal 55m slim line fan and keep the grill intact by folding the top lip down on the cross member.
Full install here.
http://www.patrol4x4.com/forum/showthread.php?t=24057
We used a late Telstar radiator with custom end tanks and Spal 55m slim line fan and keep the grill intact by folding the top lip down on the cross member.
Full install here.
http://www.patrol4x4.com/forum/showthread.php?t=24057
http://www.fj40-2f-eti-locked-n-loaded.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Who is online
Users browsing this forum: No registered users and 1 guest