Just test-fitted the 4.3 V6 Chevy with a TH700 and Marks t-case adaptor into my ex-TD42 GQ shorty and found out that the stock Chevy starter might hit the diff case at full bump pretty hard. It sits right above the diff. The V6 is basically a shortened SBC, so everything first gen. Chev V8 will apply to this engine too.
Any hints on what starter to use ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Starter with Chev engine in GQ ?
Starter with Chev engine in GQ ?
'04 Nissan Terrano 3.0Di ZD30 *pimped*, some Zooks & '87 GQ
Re: Starter with Chev engine in GQ ?
hi manOffroad-Events wrote:Just test-fitted the 4.3 V6 Chevy with a TH700 and Marks t-case adaptor into my ex-TD42 GQ shorty and found out that the stock Chevy starter might hit the diff case at full bump pretty hard. It sits right above the diff. The V6 is basically a shortened SBC, so everything first gen. Chev V8 will apply to this engine too.
Any hints on what starter to use ?
gear reduction, lilke this one
http://www.startermart.com.au/prod7.htm
they give the best clearance, and they work very well aswell.
you can clock it to get the best solenoid position also.
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
DUCATI <-----Worlds best warning label
I have heard of LH starters being used on chevy V8s for hotrod applications where clearance is an issue. As for the TH700 they the ones in aus have a exposed flex plate & torque convertor with a tin or plastic cover & you could use a cover from a holden V8 where the starter is on the left from factory
Who is online
Users browsing this forum: No registered users and 21 guests