Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

logan districts jan night run

Post all your Competition and Event info here.

Moderator: evanstaniland

Posts: 121
Joined: Mon Oct 21, 2002 9:00 pm
Location: Big Shed

Post by bobtail »

[quote="RUFF"]So Glen what time did you get home after your breakage?


RUFF
It would,nt matter what time he got home By the time we welded the realay box and got back there he was sound asleep It was day light when I got home
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

All I know is that some idiots were in my shed at 2am grinding and welding and carrying on. I was lying in bed trying to work out what (and who) had broken and needed welding at 2am. I had to get up and have a look and it was bobtail and POS welding v8grunts relay box back together.

Also heard that BJ was doing some good donuts in some guys back yard (which pissed him off) and then v8grunt tried to out do him. And then something about the coppers and something about cancelling the last stage. The rest was a blur.

:finger:

Sam
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

I broke a steering relay shaft, mick and POS drove back to sams and welded it back together, while they were gone I helped bubs recover his hilux which was close to rollover .we used a strap and a suzuki to lower it back to level ground. I got home at about 5am this morning. good run home "fast".

glen

oh and bj and I got into trouble for useing the organisers back padock as a speedway track, very special considering it was a slow event in a quiet zone opps.
Posts: 697
Joined: Sat Nov 30, 2002 7:19 am
Location: Logan, QLD

Post by Marshy »

I was officialling checkpoint 2 for the night, just off the side of the road at Canungra, no major carnage in my CP. We had one zook on his side, a couple of unlocked's get a bit hung up needing recovery, one snapped drive shaft, and Nick's front shaft came apart at the slip joint TWICE during the CP. To his credit but, he reversed and drove the left side of the CP in 2wd all the way to the top. Top effort. Still scored zero but!!
Of the 20 cars that reached my CP, 14 of them drove it clean. This CP is much easier in the dry. The last time we used it, it was p!ssing down raining, I was naving in a zook, and we fell on our side 3 times during the CP! And we still managed to finish with points. Only 5 of about 25 cars sucessfully drove the CP that night.
Last edited by Marshy on Mon Jan 06, 2003 8:50 am, edited 1 time in total.
Simon.

Event Co-Ordinator - 2007 Logan Challenge
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

dont know what you are all talking about :shock:

i passed every stage with a 100% score 8)
hands and mums dont count!!!
Posts: 374
Joined: Mon Oct 28, 2002 8:09 pm
Location: BRISBANE

Post by v8grunt »

bj on roids wrote:dont know what you are all talking about :shock:

i passed every stage with a 100% score 8)


even the speedway section for which you had your ass kicked for because mick and I claimed we just followed your lead. HAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted:
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

:finger: you and mick are a bad influence on me 8)

NOT TO MENTION i would have expected a far more mature approach from a couple of old rover blokes :shock:

rather than the, hey bj is not that bad, hell, it could have been worse, he could have had a V8 :lol: then the roar of the V8, and carving it up just as bad ;) :twisted: :twisted:
hands and mums dont count!!!
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

RUFF wrote:So Glen what time did you get home after your breakage?




Also i hear Bubs didnt fair to well either?


I found out today that i blew a CV - hmm :?

What i did do - CP 1
CP 2 Part 1- got 50-60% of the way unlocked - apprently i did well for an unlocked.
CP 2 Part 2 - drove my hill on the first attempt - even with my passengers saying i would :finger:
CP 3- didn't try
CP 4 - need lockers

between CP 4- and the end i got passed the do not exceed 30 degrees on my altimeter - once i was anchored i drove out backwards - after stuff around winching and shit

what i did do

Rear bar - bent some more
Flares - wait for my product review on Duraflares - you know the ones which flex and dont break :finger:
Parabolics - both rears are now at the same ride hieght - fronts still unmarked - i will stand by my fronts - rears can be stuffed unless you have a track bar or run overloads and dont wheel it real hard

Lessons learnt

Air Lockers is what i need :twisted:
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

hey bubs, without seeing your CV, ill bet it was the drivers side (short side one) correct? ;)

longfields mate, and welders 8)
hands and mums dont count!!!
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

bj on roids wrote:hey bubs, without seeing your CV, ill bet it was the drivers side (short side one) correct? ;)

longfields mate, and welders 8)


i didn't blow one - some one has been telling stories that i did - it was a blue x-cab not a blue 4 runner :wink: :finger:
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot], Majestic-12 [Bot], Semrush [Bot] and 107 guests