Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H - bleeding the cooling system?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 78
Joined: Fri Dec 12, 2008 6:23 am
Location: Hobart, Tasmania

2H - bleeding the cooling system?

Post by twr7cx »

Does the cooling system in the 2H need to be bled of air? As I notice there's a top bolt on the thermostat housing and some other coolant line:

Image
Image
Image
Image
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Run it with the radiator cap off for a while. I've never noticed the bolt on top of the thermostat housing. Is it a mounting bolt? Or actually a bleed bolt?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

From another thread;
Ruffy wrote:Hey stu,
Remove the heater hose off the highest fitting in the cylinder head. It is higher than the rad cap. Fill cooling system through heater hose until water comes out of fitting in head bleeding air out.

Dan
Tetanus rolling on 37's
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 11 guests