Ok i need some one to meausure the length between the TRE's on a hilux set up with snake hysteer
This is because i want to put on a 4x4 Engineering Tie Rod - but if i can - i want to run a 35mm rod with 80series TRE's and clamp the stabiliser on for now until i eventually go hysteer - so i dont have to buy 2 tie rods
I can't see any reason why they would be much different if different at all.
Buddy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Snake Hysteer
Moderators: toaddog, Elmo, DUDELUX
Snake Hysteer
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Hey bubs, I don't exactly know what your trying to run with the 4x4 engineering tierod, but from what I think your trying to do is crossover with flipped arm then the tierod lenght should be about the same lenght give or take abit, so one should fit the other. The big difference is in the drag link with it being inline on the hysteer arms as opposed to the flipped arm.
Zol wrote:The tierod itself is 38 inches in length & the distance between the centre of the mounting points including the TRE's is about 43 inches...give or take wheel allignment.
Is that what you were look for?
exactly what i was after
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
bubs wrote:Zol wrote:The tierod itself is 38 inches in length & the distance between the centre of the mounting points including the TRE's is about 43 inches...give or take wheel allignment.
Is that what you were look for?
exactly what i was after
And there goes another......Happy....customer..... 8) :wink:
Who is online
Users browsing this forum: No registered users and 14 guests