anyone have a snorkel template for a 7* series..

Post by **robbie** » Sat Jan 17, 2004 2:06 pm

I just picked up an airflow snorkel for the LHS.. just doesnt have a template..

Post by **Bundytime** » Sun Jan 18, 2004 7:12 am

just keep drilling holes to it fits, worked for me.......
or i can measure mine but its on the right hand side???

Post by **robbie** » Sun Jan 18, 2004 11:19 am

daniel..might have to just go nuts with the drill :lol:

you still got that spare LHS guard??

Post by **BeZeRK** » Mon Jan 19, 2004 6:38 pm

might have one at work, will check it out for you

Post by **robbie** » Tue Jan 20, 2004 12:56 am

thanks..

Post by **bj on roids** » Tue Jan 20, 2004 2:37 pm

the one i was promised wasn't in the kit when i bought mine

i used a old nutri grain box!! The cutout for the CD (freeCD with nutri grain) is the perfect size for the holesaw hole into your guard, mark the rest on the cardboard and then hold the cardboard against the car, and always remember:

BIG HOLES, little bolts!! :armsup:

Post by **MUSS** » Tue Jan 20, 2004 4:12 pm

bj on roids wrote:the one i was promised wasn't in the kit when i bought mine

i used a old nutri grain box!! The cutout for the CD (freeCD with nutri grain) is the perfect size for the holesaw hole into your guard, mark the rest on the cardboard and then hold the cardboard against the car, and always remember:

BIG HOLES, little bolts!!

WHINGE WHINGE FARKEN WHINGE..... :rofl:

went back and asked at the panel beaters shop bout that and they handed me a spare one but that was a month or 2 ago so i jst thru it out :finger:

Post by **robbie** » Tue Jan 20, 2004 11:26 pm

nice idea rob

Outer Limits 4x4 Board

anyone have a snorkel template for a 7* series..

anyone have a snorkel template for a 7* series..

Who is online