Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jimny Wheel bearing adjusting nut tool

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Jimny Wheel bearing adjusting nut tool

Post by Mud Toy »

Hey guys, Just wondering where sells the Tool for adjusting the nut on the jimny front wheel bearing set up..... If not ill just make one...
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

once a jimny collar is tight, its tight. they are not like normal taper rollers as they have no pre-load and are not adjustable as such.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Post by Mud Toy »

But that nut should still come off though, Im only taking it off to machine the lip off for the auto hub seal, so i can fit manual locking hubs.... CHeers :)
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

more than likely the tool will be genuine only. or get someone to fab one up.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Post by Mud Toy »

Ah i can fab one up piece of piss. if i could have bought one i would have though lol
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests