the passenger side swivel hub has sprung a leak, on my 84 hilux. is it a hard/big job to replace the seals?. would i have to pull the axle out, or could i just pull the brakes to get it out? or is this job best left to the experts?
bretty
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux leaking swivel hub
Moderators: toaddog, Elmo, DUDELUX
This thread will take you threw step by step on how to pull the CV and axle out.
http://www.outerlimits4x4.com/PHP_Modul ... 153#155153
Once as you have done this, there is a oil seal inside the housing. That is the one that needs to be replaced.
You can buy a swival hub seal kit (that does both sides) and has all the seals you need!!!
You may also need to pull the knuckle off and replace the seals and dust cover on the back of the knuckle!
http://www.outerlimits4x4.com/PHP_Modul ... 153#155153
Once as you have done this, there is a oil seal inside the housing. That is the one that needs to be replaced.
You can buy a swival hub seal kit (that does both sides) and has all the seals you need!!!
You may also need to pull the knuckle off and replace the seals and dust cover on the back of the knuckle!
Who is online
Users browsing this forum: No registered users and 2 guests