Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Electric trailer brake

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Electric trailer brake

Post by frp88 »

I have bought a caravan with a 12 volt electric brake but the cruiser is 24 volt. Will the controler handle it for some time cos I know you can feed 24 volt into a winch motor without it having blow up straight away. I have fitted 12/24 volt led tail light so that part is sorted I am hoping some one can help.
LETS GO BRONCOS
Top
Posts: 73
Joined: Mon Jan 28, 2008 9:43 am
Location: Newcastle

hey

Post by 4runner_boy »

the electric brake controller will not handle it, it will fry you will need a voltage reducer of atleast in my opinion 15amps.
Top
Posts: 121
Joined: Sat Oct 04, 2008 1:31 pm
Location: Canberra

Post by presto »

i assume you have two 12 volt batteries in series to make the cruiser 24 volt, so you could hook the electric brake system off one battery and just put in another brake light switch running off 12 volt too. should be pretty easy to set it all up.
im surrounded by money pits
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Re: hey

Post by frp88 »

4runner_boy wrote:the electric brake controller will not handle it, it will fry you will need a voltage reducer of atleast in my opinion 15amps.
cheers for that I think that will be the best way to go
LETS GO BRONCOS
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

presto wrote:i assume you have two 12 volt batteries in series to make the cruiser 24 volt, so you could hook the electric brake system off one battery and just put in another brake light switch running off 12 volt too. should be pretty easy to set it all up.

would also destroy one if not both of his batteries too
Top
Posts: 121
Joined: Sat Oct 04, 2008 1:31 pm
Location: Canberra

Post by presto »

oh yeah shit, sorry my bad. definately use an inverter, if you do what i said it will make one battery boil and the other not charge properly since theyre charging in series.

cheers shadow :oops:
im surrounded by money pits
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests