Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
heavy duty tailshaft
Moderator: Micka
heavy duty tailshaft
any one know where toget a heavy duty front tailhaft to suit defender , ive had a lift kit in the car now for a couple of years and my problem is vibration and i dont like the angle on the top uni joint at th t case end, any ideas would be appreciated,
http://www.4xshaft.com/index.html
( sorry scroll down to super flex joint in the middle of screen)
Any reason we cant use these??
What size uni would say the said drive shaft use??
Or a 91 Rangie for the intrest of curiosity.
( sorry scroll down to super flex joint in the middle of screen)
Any reason we cant use these??
What size uni would say the said drive shaft use??
Or a 91 Rangie for the intrest of curiosity.
The superflex unis will vibrate on a street truck.
I'm not sure what everybody else is running, I've got Tom Woods on both of my trucks and they're running his 1310 unis all round which are a bit bigger than Rover. That includes DC joints so it'll be interesting to see how they go, but so far so good.
http://www.4xshaft.com/Landrover.html
If you want to step them up to 1330's or whatever Tom will do that also, but the bigger the uni the bigger the vibration.
I'm not sure what everybody else is running, I've got Tom Woods on both of my trucks and they're running his 1310 unis all round which are a bit bigger than Rover. That includes DC joints so it'll be interesting to see how they go, but so far so good.
http://www.4xshaft.com/Landrover.html
If you want to step them up to 1330's or whatever Tom will do that also, but the bigger the uni the bigger the vibration.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
I bought complete shafts from him and he was also kind enough to send me a spare yolk to keep for remote touring. I'm pretty sure he will send the uni's by themselves or whatever bits you want. I wanted larger uni joints in the shaft so needed the whole shaft rather than just replacing the uni.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Nottie I don't believe the 1310's can be fitted to a standard shaft, the yolk ears are not big enough. The prices for the shafts are on Toms website in USD. I've just had a troll through my receipts and the billing receipts haven't got freight marked on them. but IIRC it was about $1200-1300 AUD for 2x 1310 DC shafts on my door.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Who is online
Users browsing this forum: No registered users and 1 guest