Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sprung over 75 steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Tue Dec 02, 2008 5:11 pm
Location: Tamworth

sprung over 75 steering

Post by bruiser17 »

have a sprung over 75 cruiser and just wondering who else has one and how it handles on the road. mine pulls to the left a bit because i think i have a bent axle housing. toe in good
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

Wow another SOA 75 nice!

Mine drives remarkably well for having spacers and modified everythings...

I have a slight pull to one side (done by eye alignment)

I have a random death wobble @ 30kmph and only if i hit a bump
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 4
Joined: Tue Dec 02, 2008 5:11 pm
Location: Tamworth

Post by bruiser17 »

yeh i know my castor is wrong at the moment and wheel alignment spot on. mine pulls left not bad but enough to anoy me. drives good no vibrations
Top
Posts: 338
Joined: Wed May 23, 2007 6:11 pm
Location: Sydney

Contact:
Contact Buggerific

Post by Buggerific »

I have a 75 but not sprung over... It was pulling badly to the left and it took a few trips to the shop to get it fixed... basically because they were idiots and couldnt do what they said they did...

Anyways, at the end of the day the things that made it pull left was prodominately the castor bearings and they put in whatever offset they needed to get it to go straight. Then the steering damper needed to be realligned because it was waaaaaay out. So i dont know if you have one of those heavy duty RTC dampers but it was pulling the whole thing left.
Ozkor Auto Tech - 51 Orchard Road, Brookvale

1997 HZJ75 - 2" Springs, 33" MTZs, Touring Rig with more toys to come!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests