Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear mounted radiators

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 43
Joined: Thu Nov 20, 2008 11:52 am
Location: melb

rear mounted radiators

Post by ronno88 »

im looking at mounting a aluminium radiator (which i already have) to the rear of my tray.
im running a 350 chev with a aluminium edelbrock water pump to the original 40 series radiator which runs a bit hot.
has anybody done this that can give any tips on what tubing to run to the tray which thermo fans would be best and if the water pump would push that far?

also what temp would i expect it to run at, it currently runs around the 90-92 degrees and 4wden up to 95.
Posts: 75
Joined: Fri Jan 09, 2009 8:04 pm
Location: Moranbah

Post by trev1 »

I'd be making sure that the standard one you have is OK first (clean) . Rear mount is fine for a comp car or speedway, but it makes it very vunerable if you ever put anything in the back with it.
If you have to, just use exhaust tubing and get the exhaust shop to bend it up so there is no hose joins underneath.
You will probably get more cooling effect from the extra volume of coolant more than radiator placement. Another option may be to put a heater core behind the side vents , and run it full flow in the heater circuit tee'd off.
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests