Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dumb central locking question

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Dumb central locking question

Post by M1S3RY »

My brother-in-law is wiring up the central locking in his Zook, but he's doesn't know where exactly you connect the lock/unlock sensor wires to (They lock/unlock when grounded).

Any help?
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 33
Joined: Fri May 26, 2006 9:55 pm
Location: Victoria

Post by xl7fan »

G'day, those wires are so the central locking can be controlled by a remote unit or alarm. Does he have one of these as well? Need a bit more info.

Cheers

Matt.
Matt 2001 XL7. OME 2" lift, Cooper ATR's, TJM alloy bar, Piranha Dual battery setup, Command cruise control, Viper alarm, Uniden UHF.
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

No, just stand alone central locking.
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 47
Joined: Sun May 02, 2004 11:47 pm
Location: Dubbo, NSW, Oz

Post by smiley »

just terminate them they are only used when a remote imobiliser/alarm is installed aswell
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

smiley wrote:just terminate them they are only used when a remote imobiliser/alarm is installed aswell
Sorry, terminate them as in ground them or insulate them off at the ends?
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 1413
Joined: Mon Aug 21, 2006 5:54 pm
Location: Perth

Post by Moph »

Insulate the ends with a bit of heat shrink. Not a bad idea to tag them too though in case he installs an alarm later - he'll no doubt have lost the central locking wiring diagram by then!
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests