Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

who sells dawn dies + cheep pipe benders

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 58
Joined: Thu Jun 21, 2007 7:57 pm
Location: central coast

who sells dawn dies + cheep pipe benders

Post by flexit »

hey , I'm looking to buy a cheap bender and get a dawn die to yo use with it I'm on the central coast and I'm having trouble finding the dawn dies's.has anyone been out end bought one lately that can tell me where to go. and has it bent your pipe ok
GQ chopped ' 350 CHEV 37s lockers and a pistoff Misses
Top
Posts: 124
Joined: Tue Sep 26, 2006 8:34 pm
Location: newcastle

dawn die

Post by daz4b »

got mine from blackwoods 32nb $90 they had to order it in ,works excellent in cheap bender ,you have to make a adaptor to fit the jack shaft darren
Top
Posts: 58
Joined: Thu Jun 21, 2007 7:57 pm
Location: central coast

Post by flexit »

OK that's the go ar blackwoods in Newcastle? what pipe did you bend
GQ chopped ' 350 CHEV 37s lockers and a pistoff Misses
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

i have a dawn die but i reckon the centre line radius sux.

bends are too wide, i'm looking for something better but can't find anything.

any ideas for 40nb???
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 124
Joined: Tue Sep 26, 2006 8:34 pm
Location: newcastle

dawn die

Post by daz4b »

yep in newcastle, i bent 32nb black medium and heavy pipe darren
Top
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

Post by r0ck_m0nkey »

flexit wrote:OK that's the go ar blackwoods in Newcastle? what pipe did you bend
I think there is one at Tuggerah also.
If God did not intend for us to eat animals, then why did he make them out of meat?
Top
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

I got my die from blackwoods and the 12t bender from super cheap. I use a 19mm 3/4 drive chrome socket as the adapter between the benders piston and the die.
Shane
Top
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Pipe Bender

Post by stinger »

Just today I bought a 12t pipe bender from Trade Tools Direct at Gold Coast for $151, will try a couple of practice pieces and decide if I want to get Dawn dies...
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Re: Pipe Bender

Post by nottie »

stinger wrote:Just today I bought a 12t pipe bender from Trade Tools Direct at Gold Coast for $151, will try a couple of practice pieces and decide if I want to get Dawn dies...

Pretty certain you will be ordering a dawn die :lol:
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

YankeeDave wrote:i have a dawn die but i reckon the centre line radius sux.

bends are too wide, i'm looking for something better but can't find anything.

any ideas for 40nb???
I think you will have to go to a tube bender to get tighter radii.

I haven't seen a pipe bender die that has a better radius than the Dawn and still produces the same quality of bends. If there is one, feel free to post up.


This is assuming of course that you have moved the rollers in as far as you can?
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Re: Pipe Bender

Post by jeep97tj »

stinger wrote:will try a couple of practice pieces and decide if I want to get Dawn dies...
Will be just a waist of pipe.
Shane
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

i have got a a cheap pipe bender. build a tube bar with it. the bends where so bad using medium pipe i that got 32nb heavy (4mm) and pack it with sand. bends are still of ok quality but next time dawn die for me. i am thinking of modifying my bar again so i will getting a dawn die soon
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
Posts: 58
Joined: Thu Jun 21, 2007 7:57 pm
Location: central coast

Post by flexit »

OK it's on its way 32nb dawn die$117from blackwoods and a 12t air operated bender$399 from Sydney tools. and what pipe are yous using and where to by it from I'm up gosford way????
GQ chopped ' 350 CHEV 37s lockers and a pistoff Misses
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

Well a 32nb die will need 32nb tube
Use 3.2 (medium )wall tube.
Another trick is to slice a say 80mm section of 40nb pipe thru the centre and weld it to the rollers on the bender as so they dont dint the tube.
Like this 0( If you get what i mean ;)
Top
Posts: 58
Joined: Thu Jun 21, 2007 7:57 pm
Location: central coast

Post by flexit »

OK so the 32nb pip slides on/in the 40nb half pip but rollers don't spin ??? how long do you leave the half pipe on each side just 80ml
GQ chopped ' 350 CHEV 37s lockers and a pistoff Misses
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest