Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G16 mpfi exhaust question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 60
Joined: Tue Oct 07, 2008 3:11 pm
Location: Oldina, North West Tasmania

G16 mpfi exhaust question

Post by Bron5on »

Hey guys, I'm trying to alter my sierra extractors (genie) which i bought new about a month before I decided to swap to a G16 mpfi. My basic plan is to cut the flange off the extractors and get another in the G16 bolt pattern cut and welded on then add a fitting for the oxy sensor. When I removed the factory manifold I discovered another hole in the back of the block which is bridged to the #4 (closest to firewall) exhaust port via the manifold. Where does this go and what does it do?? If I blank it off by just covering it with the new manifold will the engine run better, worse, no change or not at all?? Thanks in advance.

Bronson
Top
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

The small hole in the back of the head is for the EGR valve, blocking it is no problem, most vitara 1.6 injection have problems with the EGR systems creating a low speed missfire, blocking it off is prob better than leaving it open.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Posts: 60
Joined: Tue Oct 07, 2008 3:11 pm
Location: Oldina, North West Tasmania

Post by Bron5on »

Cheers matey, that's just what i wanted to hear!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests