I am installing a GT28 into a GUIII TD6 but have a clearance issue with the waste gate actuator and bracket. Due to using a adaptor the turbo drops down further than the original and the bracket fowls hosing and does not allow the turbo to bolt to the manifold. While I could re route the hose the clearance on the inner guard is minimal and would prefer it to be larger.
Positioning of the actuator cannot be moved so was wondering what options may be out there.
If anyone has a pic of a GT28 in a GU showing the actuator position it would be helpful.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GT28 WG Actuator Options
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Who is online
Users browsing this forum: No registered users and 2 guests