Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LS1 AC BRACKET

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 23
Joined: Tue Jan 08, 2008 3:02 pm
Location: CAIRNS

LS1 AC BRACKET

Post by todsmods »

CHASING AN AC BRACKET TO RELOCATE COMPRESSOR UP TOP OF LS1 ENGINE IN GQ. ANYONE IN AUZ DO THEM? TRIED MARKS ADAPTORS.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

eagle, suburban?
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

castle auto
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

Post by killalux »

We are working on developing a bracket to mount a sanden compressor up high on the drivers side of engine, aswell as one to mount the alt up high on the pass side.

Not sure of availability dates yet though. Not to far off we hope.

steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 79
Joined: Sat May 08, 2004 8:56 am
Location: Sydney

Post by GU_247 »

killalux wrote:We are working on developing a bracket to mount a sanden compressor up high on the drivers side of engine, aswell as one to mount the alt up high on the pass side.

Not sure of availability dates yet though. Not to far off we hope.

steve
Heres my sanden compressor Im using for endless air. I still have the factor GM air cond on the drivers side


Image

BTW its mounted on a VS 5.0L
Ive also added a strap to one of the lugs on the front of the compressor to remove any harmonics
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 122 guests