Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60series onto 80series chassis will it fit ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

60series onto 80series chassis will it fit ?

Post by mick&shon »

the misses just bought a 60 and the chassis has alittle rust
in it so she was wondering if she got a 80series rolling chassis
would the 60s body line up
cheers mick
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Top
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

most likely would have to move the body mounts on the chassis to suit.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

IT would be a bit of work but it could be done relatively easily
hands and mums dont count!!!
Top
Posts: 9
Joined: Fri Nov 25, 2005 5:03 pm
Location: brisbane

Post by 80rvcruiser »

If you use this link and put in your browser, details a guy in America putting a 60 series body on 80 series chassis.

http://forum.ih8mud.com/60-series-wagon ... ranus.html

Warren
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Ive also seen two FJ45 cabs put onto 80 series' so its definitely been done.
hands and mums dont count!!!
Top
Posts: 102
Joined: Sun Feb 24, 2008 2:19 pm
Location: Bowenville, Queensland

Post by mick&shon »

the 80series running a 3F/5spd would have same mounting points as the 2F/5spd??? they nearly the same arnt they....anyway its just a idea she will be happy either way she wants a truck so she can learn and have some fun :D
85 rangie 3.9i,disco5sp,4'' lift,80series rear, gq front, 33mtz
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

mick&shon wrote:the 80series running a 3F/5spd would have same mounting points as the 2F/5spd??? they nearly the same arnt they....anyway its just a idea she will be happy either way she wants a truck so she can learn and have some fun :D
There is a cheap 80 series chassis in the forsale section on here, and you need a fair bit of room. I would think the mounts are different, check the link in the above post for the thread on how the guy did it, lots of great pics, came up looking neat as too.
hands and mums dont count!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests