Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Changing brake rotor

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 77
Joined: Fri Aug 05, 2005 1:26 am
Location: N.S.W

Changing brake rotor

Post by Seafarer »

Hi all,

Just wondering if anyone can offer any advise on what's involved wih changing the rear disc rotor of GU Patrol.



Thanks.
Cheers,
Mike
~1999 GU TD42T~
Posts: 270
Joined: Tue Jul 08, 2008 4:47 pm
Location: Burpengary.... Where the hell is that?

Post by Red Dog 4x4 »

Take the rear calipor off two bolts on the back side and the rotor should come strait off the wheel studs, Easy.....
Posts: 77
Joined: Fri Aug 05, 2005 1:26 am
Location: N.S.W

Post by Seafarer »

Thank You.
Cheers,
Mike
~1999 GU TD42T~
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

eekkkk dont forget some lock tight putting caliper bolts back on.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

i have never used lock tight on caliper bolts, there shouldn't be a need considering they have spring washers. I have never had any dramas in all he years ive been driving.
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

ozy1 wrote:i have never used lock tight on caliper bolts, there shouldn't be a need considering they have spring washers. I have never had any dramas in all he years ive been driving.
Spring washers get old and shitty and of course some cars don't have them its cheap insurance at a few cents per car.
My bitch has boost, Nutter Engineering Turbo GQ
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

healthy spring washers are a part of looking after your vehicle though, are they not?

same as split pins in your steering, nylon lock nuts if you've got them anywhere and of course using an appropriate amount of torque to tighten things up.

In saying that i've had a brake caliper come off while driving. One of the bolts holding the caliper into the slider came out and the caliper then moved out and scraped on the inside of the rim. Not nice!!! Had to get a new caliper as it was warped (very soft metal) and the sliders were knackered - so being a GQ it was easier to buy a new one haha
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

Ive fixed a few cars over the years where 1 bolt has come out, not so bad if you have small rims but if you have big rims small brakes it can be disastrous.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 2
Joined: Wed Feb 04, 2009 7:33 am
Location: Toowoomba

Post by dlowe »

no harm in using locktite......double the insurance...:-)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest