Rover steering box replacement

[auto_eng]

The steering box in my Rangie is leaking a bit and I had to change my pitman arm but have not been able to get the replacement pitman arm to seat properly on the box.

It has a little bit of movement between box and arm no matter how much I tighten it up. The spline is old and had worn to my old pitman.

Time for a new box. Does anyone know the best place to get one?

What should I pay for a second hand (4 bolt type)?

I was quoted $950 for a reco box which seemed a bit high for a reco. If I buy a used one I will put new seals in it before putting it in so any tips here would not astray either.

Thanks

[isuzu110]

Try Mr Goodwrench (also trades as All Car Power Steering) at Bowen Hills in Brisbane. Had mine rebuilt for around $800. He removes the bush from the bottom of the box and replaces it with a bearing so that it will never leak again. He has both 3 and 4 bolt types.

[ISUZUROVER]

Prices usually vary depending on whether the sector shaft needs replacing as part of the rebuild.

[modman]

try adrian at toorak tractor in braeside melbourne.
he is $450 c/o with verygood second hand gear, 4 and 5 bolt.
i believe he does rebuilds as well??

david