Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dinted my shocks

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

dinted my shocks

Post by brendan_h »

:x lucky i didnt ramp it up all the way. they dont leak but will this effect the shock in anyway?

Image
Image
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

Most the time a dent wont affect the shock pop it off and feel it through the travel if its dented too far will have a tight spot then will need replacing if not keep driving with it
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

the top casing on my rear shocks for my zuk(hilux shocks) are all hacked up and dented from hitting brackets on the diff under compression,have been like this for ages and im still running them lol :lol:

just pull off and check for any notches,tight spots possibly damAGED from the dent
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

As others have said, if its not binding, then keep running it.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

is that from the metal brake line brackets? my shocks ended up getting pierced from the brackets so when i replaced the shocks i removed the bracket and pushed the line away from the shock to avoid damage to the new shocks. it might be worthwhile doing this to avoid having to buy new shocks.
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

mines the same only one side
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

hope they are alright. cost me 400bucks for 2 of em stupid overprice ranchos :x
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

the shocks i wrecked were ranchos. they were way to stiff anyway
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

My brake line brackets did the same. it would be nice if suspension kit manufacturers mentioned that problem when selling their gear.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

fix the problem. the tires rub on the shocks now :D i dont think its ready that bad but it there only when flexing up. that shouldnt cause damage now will it? i thinking of puting some thin sheet steel or someing to protect the shock from the tires?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

The problem is not fixed until there is no contact anywhere. Post some pics and someone will be able to help out.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

the only way to solve the problem now is bigger offset rims
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests