Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Interesting Reading.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Interesting Reading.

Post by joeblow »

lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

"It's my belief that someone with a Samurai ran over a Gypsy's dog or something years ago, and he laid a curse on the whole lot."
:rofl:
4age zook ute in lots of bits
Posts: 282
Joined: Sun Dec 24, 2006 5:10 am
Location: Lawnton,Brisbane.

Post by simcoz »

Looks like all the yanks need a roctoy rockring.(another qaulity austalian product) :armsup:
Corey & Simone
Team Cozamatic Racing
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

make me thinking of getting smaller transfer gears and uping the diff gears
[color=green]Vote Earth[/color]
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

why would they go to the trouble of making 42inch tyres fit and still run a sierra transfer case?
seppo's are strange
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

sheps wrote:why would they go to the trouble of making 42inch tyres fit and still run a sierra transfer case?
seppo's are strange
Bingo.

It's years since we've had gears fail the in the club in vic.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Gwagensteve wrote:
sheps wrote:why would they go to the trouble of making 42inch tyres fit and still run a sierra transfer case?
seppo's are strange
Bingo.

It's years since we've had gears fail the in the club in vic.

Steve.
The 6 to 1's and 4.16 to 1's were notorious exploders though.

The cut and shut 4.16s were found to have quite a bit of runout, never owned 6 to 1.s .. any idea why so many of them used to go boom.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Well I drive my zook daily and it has a lightly worked GTi motor, stock ratio wt diffs with rear lockright and runs on 31" pedes and I give it a whole lot of hell on the blacktop which afaik would be probably the worst thing I could do to it. My trail gear 6.5's in mighty kong with gorilla grip mounts are still going strong after a year of this. I have started to twist rear axles and I'm getting the uni's on the rear shaft replaced atm but still the gears are fine. I think like others mentioned that these guys are just asking too much of the gears with their tyre size. I might suss out some 4.1's for when I go to 32" pedes or similar next tyre change, I'll want the extra high range gearing anyway.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

GRPABT1 wrote:Well I drive my zook daily and it has a lightly worked GTi motor, stock ratio wt diffs with rear lockright and runs on 31" pedes and I give it a whole lot of hell on the blacktop which afaik would be probably the worst thing I could do to it. My trail gear 6.5's in mighty kong with gorilla grip mounts are still going strong after a year of this. I have started to twist rear axles and I'm getting the uni's on the rear shaft replaced atm but still the gears are fine. I think like others mentioned that these guys are just asking too much of the gears with their tyre size. I might suss out some 4.1's for when I go to 32" pedes or similar next tyre change, I'll want the extra high range gearing anyway.
Go the trail tough 4.9s had mine in for years on 31s then 34s lockrite front then in the rear with airlocker front. I keep the oil clean and they have never missed a beat.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

love_mud wrote: The 6 to 1's and 4.16 to 1's were notorious exploders though.
Of sure, I've seen/heard of lots of failures, but nothing lately.

We're blowing axles, diffs and mounts but not gears.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

That read wasn't that intersting, though its good to hear that trail gear's customer service was up to scratch.

BTW; I've racked up around 20,000km on my trail tough 4.9s so far, no issues (had a roctoy ring on them since day 1).
Wheeling on completely wicked angles, without even looking stable.
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

dank wrote:
GRPABT1 wrote:Well I drive my zook daily and it has a lightly worked GTi motor, stock ratio wt diffs with rear lockright and runs on 31" pedes and I give it a whole lot of hell on the blacktop which afaik would be probably the worst thing I could do to it. My trail gear 6.5's in mighty kong with gorilla grip mounts are still going strong after a year of this. I have started to twist rear axles and I'm getting the uni's on the rear shaft replaced atm but still the gears are fine. I think like others mentioned that these guys are just asking too much of the gears with their tyre size. I might suss out some 4.1's for when I go to 32" pedes or similar next tyre change, I'll want the extra high range gearing anyway.
Go the trail tough 4.9s had mine in for years on 31s then 34s lockrite front then in the rear with airlocker front. I keep the oil clean and they have never missed a beat.
It'll depend on what size tyres I can fit what diff gears I get, I don't really want to go too much higher than 33" though as it's pretty high already and I'm not in victoria.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests