Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Using 90/100W headlight bulbs with standard wiring loom - GV

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Using 90/100W headlight bulbs with standard wiring loom - GV

Post by grazza »

Hi,
I was after some advice on fitting 90/100W bulbs to my Vitara using the standard wiring loom, which currently have the 55/60 bulbs.
Do you think it will draw too much current for the standard wiring?
The guys selling them said that it should be OK - anyone with first hand knowledge can confirm this?

thanks
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

Should be fine. I ran them i mine when i had it. The only issue you might need to watch for is if yours has plastic reflectors.... they may melt if you generate too much heat.

Should still be ok though.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

Using those bulbs I'd err on the safe side and make an Axillary harness for them, it's not that hard to do, I run one in my BF Falcon. in saying that it's usually not the actually harness that's the problem, it's usually the fuse panel that melts
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

You will propably find that if you make a decent harness for the headlights, they will become much brighter anyway without changing out bulbs.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

X2 running upgraded bulbs with stock wiring is dumb.

You will see an obvious improvement with upgraded wiring alone.

Upgrading the bulbs alone only makes the volt drop through the stock wiring worse.

Upgrade the loom, then put whatever globes in it you want.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I've fitted Osram Nightbreakers with stock wiring into my XL-7. They give a worthwhile improvement with no wiring changes. They're still 55/60W.
David
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest