Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

my new 37" maxxis are only 35's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

my new 37" maxxis are only 35's

Post by matto »

i took a measurement today of my tyres because i couldn't tell the difference between my new 37" maxxis creepys and my old 35" simex.
The maxxis are only 35's Whats with that?Image
Image
Image
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

some tires are undersized.
claws are a perfect example..

some are also oversized
simex is another good example
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

it pisses me off cos i wanted 37's, does anyone have maxxis 35" that can do a measure
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 107
Joined: Tue Sep 09, 2008 10:14 pm
Location: THE SHIRE:BIRTH PLACE OF MODERN AUSTRALIA

Post by AUSDOG »

thats hurtn! i'm about to buy a set of 37'' creepys. what width rim are you running?
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

AUSDOG wrote:thats hurtn! i'm about to buy a set of 37'' creepys. what width rim are you running?
Rim width will not affect the fact that the carcass diameter is only 34-35"
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

matto wrote:it pisses me off cos i wanted 37's, does anyone have maxxis 35" that can do a measure
Lesson101: take a tapemeasure when looking at tyres.

I can fit some "33's" on a vehicle with a hard limit of 31.5 (bodymount point on chassis under full compression and half steeringlock).
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

8" rim.
I sent an email to the place i bought it from to see if they can help me out.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

I am sure you're not the first to be deceived by this bit of marketing trickery.
This is not legal advice.
Top
Posts: 163
Joined: Mon Aug 22, 2005 10:26 pm
Location: act

Post by stressed »

the overall sizes for the 37 creepys is for the 16inch is 36.8 and for the 15inch is 37.1 i hope it helps
when people say they are under the wifes thumb well im under her foot

more right foot the better the fun facter

member of cor4x4
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

stressed wrote:the overall sizes for the 37 creepys is for the 16inch is 36.8 and for the 15inch is 37.1 i hope it helps

measured? or stated by them?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i would be happy if it was more then 35" its nowhere near 37"
here are some pictures of my 50% worn simex
[/img]http://i497.photobucket.com/albums/rr33 ... 86.jpg[img]
[/img]http://i497.photobucket.com/albums/rr33 ... C02987.jpg
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

try again
Image

Image
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 163
Joined: Mon Aug 22, 2005 10:26 pm
Location: act

Post by stressed »

stated by them
when people say they are under the wifes thumb well im under her foot

more right foot the better the fun facter

member of cor4x4
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

Tyres

Post by micks troll »

Bad luck mate. My stepfather was spewin with his Claws as they were supose to be 33 and were only 31.5. Where as my Swampers measure nearly 34" (33x12.5x15 on 8"rim)when new. They are nearly 2" taller than crappy MTRs on the same rims too. Definetly helps to double check the true hieght not the bullsh#t they tell ya! hope the shop helps ya out!
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

thats funny, because from memory a few years ago didnt a few competitors have trouble getting into outback challenge and 8 day international? maybe theyve changed something.
turbos are nice but i'd rather be blown
Top
Posts: 65
Joined: Tue Jan 14, 2003 9:37 pm
Location: Brisbane

Post by bazuky »

i bought my old 265/75/16 bridgestone alltars back cause the other blocke bought some 35/12,5/15 creepys side by side the bridge 's were about 20 mm taller he was not happy
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

bazuky wrote:i bought my old 265/75/16 bridgestone alltars back cause the other blocke bought some 35/12,5/15 creepys side by side the bridge 's were about 20 mm taller he was not happy

so why did you bring yours back? :? :? id understand about the other bloke but not you... 32s the size of 35s :cool:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

chunderlicious wrote:thats funny, because from memory a few years ago didnt a few competitors have trouble getting into outback challenge and 8 day international? maybe theyve changed something.
i think that was the 14.5" wide tye on 15" rim
Top
Posts: 107
Joined: Tue Sep 09, 2008 10:14 pm
Location: THE SHIRE:BIRTH PLACE OF MODERN AUSTRALIA

Post by AUSDOG »

DAMKIA wrote:
AUSDOG wrote:thats hurtn! i'm about to buy a set of 37'' creepys. what width rim are you running?
Rim width will not affect the fact that the carcass diameter is only 34-35"

was just curious to see what he was using as i want a 10inch rim but some are saying 9 is fine. I think i'll go with 10inch..
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

You'd think most 15's and paricularly tyres with imperial clasifications would be what they are supposed to be. However most of the metric 16's are only rough and close conversions. I've never really cared but my mate was similarily pissed when his new gen BFG muds (315/75x16) were only 34" compared to his old ones which were 35. Came to measure my MTZ's and they are only 34" as well.
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

mickyd555 wrote:
chunderlicious wrote:thats funny, because from memory a few years ago didnt a few competitors have trouble getting into outback challenge and 8 day international? maybe theyve changed something.
i think that was the 14.5" wide tye on 15" rim

i dont get that... why go for a wide rim with a similarly wide tire??? do you like popping beads? (beadlocks excluded)

i personally prefer a narrower rim to tire...
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

i think he meant 15x8 rim and the 14.5 inch tyres
turbos are nice but i'd rather be blown
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

DAMKIA wrote:
AUSDOG wrote:thats hurtn! i'm about to buy a set of 37'' creepys. what width rim are you running?
Rim width will not affect the fact that the carcass diameter is only 34-35"
actually when you install it on a smaller rim, teh middle of the tread baloons and makes the tyre a bit taller in the middle.

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

Can someone measure a set of 35 inch creepys.

My 33 inch MTZs measured are 31 inches.
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

chunderlicious wrote:i think he meant 15x8 rim and the 14.5 inch tyres
yes i did, they only brought out the 14.5" tyre to suit a 15" rim.
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: my new 37" maxxis are only 35's

Post by steel »

matto wrote:i took a measurement today of my tyres because i couldn't tell the difference between my new 37" maxxis creepys and my old 35" simex.
The maxxis are only 35's Whats with that?Image
Image
Image

how else do you think so many people can bragg '' Im running 37's" :lol:.
I once measured some 38' swampers that were just 35'!!
:?
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Re: my new 37" maxxis are only 35's

Post by steel »

matto wrote:i took a measurement today of my tyres because i couldn't tell the difference between my new 37" maxxis creepys and my old 35" simex.
The maxxis are only 35's Whats with that?Image
Image
Image

how else do you think so many people can bragg '' Im running 37's" :lol:.
I once measured some 38' swampers that were just 35'!!
:?
Top
Posts: 43
Joined: Mon Oct 23, 2006 8:47 pm
Contact:
Contact gq banger

Post by gq banger »

I just went down to my shed & measured my 37" Creepy's & they measured 36.25". My tyres are not new but still have plenty of tread left on them. They are mounted to 16x8 rims
Terry
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

this is pretty much false advertising.

They should be labeling them as 35's. They are obviously just doing it to scam people.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Shadow wrote:this is pretty much false advertising.

They should be labeling them as 35's. They are obviously just doing it to scam people.
bit harsh.
this bloke above you has the right size.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 94 guests