hi, i am about to replace my body mount bolts, when i bought the car it came with the body blocks in it already, but it seems that the bolts used are as dodgy as they come, there have been 3 or 4 nuts that are larger than the bolt thread stacked ontop of each other acting as spacers so the bolt can tighten.
what i want to know is the length and width of bolts needed to fit perfectly, and apparently there are 2 bolts that are longer than the other 8??
cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2" Body Block bolt lengths and widths for GQ WAGON
They are M10 (10mm) and the back two are M12 but I don't know the thread pitch or the lengths off the top of my head.
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
G'day mate you may have already got it sorted but I have one of the original body bolts out of my Troll (very certain it is) and it is a M12 127mm (5") long with 95mm long shank, add 2" and you've got correct length. Just not sure of rear 2 bolt length!
Hope this helps!
Hope this helps!
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
licorice all sorts added
Who is online
Users browsing this forum: No registered users and 4 guests