G'day all,
First question, is it possible for the load leveler to effect lifted springs by holding the car down??
I bought a set of 2" springs, front lifted up perfectly, but the rear didn't even move.
any idea's ??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suspension lift problem
Moderator: Micka
suspension lift problem
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Load leveler, yeah get rid of it.
We did a little test on one of our cars just before putting in 4" spring lift, the car had 2" lift and the leveler in it, so we ramped it, we then removed the leveler and ramped it. Funnily enough the car sat higher (approx 10mm) in the rear and increased travel by 25%. this was all standard except the spring lift. Hope that gives you some level information. EH EH, (bad i know).....
bEN
We did a little test on one of our cars just before putting in 4" spring lift, the car had 2" lift and the leveler in it, so we ramped it, we then removed the leveler and ramped it. Funnily enough the car sat higher (approx 10mm) in the rear and increased travel by 25%. this was all standard except the spring lift. Hope that gives you some level information. EH EH, (bad i know).....
bEN
Who is online
Users browsing this forum: No registered users and 34 guests