Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Overboosting NJ

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Overboosting NJ

Post by fazza81 »

Hi all,

My pajy is doing something funny, Usually the boost guage will go up to 11 -12 psi but now it will boost to 14-15psi and when towing a trailer you can hear the pop off valve vent. So I assume it is overboosting but why. I have changed the line between the turbo and wastegate which should controll the boost what else could it be?

Thanks
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Model?
Posts: 137
Joined: Sun Nov 02, 2008 8:07 pm
Location: SYDNEY

Post by jonnyjtop »

hi mate...i dont think there is a major problem....the weather usually affects turbo cars if its been colder than usual that could be the reason its boosting more...the pop off vent is actually turbo backspin that your hearing usually it will get louder if boost pressure is increased/ or there is extra load put on the engine...to fix the problem you could get a boost controller and run the pressure you want...also sometimes inside that pipe you said you replaced is a little nipple inside the pipe (on some cars) removing that or replaceing the pipe with a slightly longer/shorter one will affect the boost pressure....
j-top 3l v6 2+2 33s rear locker 4.9s thats it
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

The actual wastegate could be sticking within the turbo- they are subject to lots of junk and deposits. Is the vacuum diagram (assuming its vacuum/boost operated) worn. If you suck on the line does the actuator move. But as Scott said, a model would help.
Posts: 98
Joined: Tue Feb 10, 2009 7:17 pm
Location: ALEXANDRA HILLS

Post by REDNUT »

how much boost should a nj be running?

mine sits about 7psi, but when i put my foot down it goes up to 12psi,

im told mine is standard, although i have removed a muffler
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

mine used to run an average of 10PSI most times.. but on some cold winter nights i noticed it up to 18PSI without anything sounding any different. if i didnt have a boost guage i wouldnt have known at all
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

Ok

It is a 1996 NJ GLS 2.8td with a 2.5inch exhaust.

The pop off valve has only just started venting in the last 2 days started when I towed a car trailer on Saturday but with out a trailer turbo goes to 14 psi (it was at night) but the valve stays closed.

I might pull the turbo off and check the waste gate is sealing properly sounds like that could be the drama
Posts: 98
Joined: Tue Feb 10, 2009 7:17 pm
Location: ALEXANDRA HILLS

Post by REDNUT »

j-top paj wrote:mine used to run an average of 10PSI most times.. but on some cold winter nights i noticed it up to 18PSI without anything sounding any different. if i didnt have a boost guage i wouldnt have known at all
did u happen to notice if your guage ever went to the vacume side or always sat on boost?
mine always seems to be around 1 -2 psi untill its turned off
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

guage would go back to 0 but never into vaccum..
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

My guage always always sits on 1 psi never into vacum.

Only just touches 14 psi now and that is at about 5000rpm not sure what is happening.

Cheers
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

fazza81 wrote: 5000rpm



:shock: :shock:
how hard are you pushing it?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

That was only in testing. normal driving is up to 3000 - 3500 and if you accel had it is still boosting over 15psi time to pull the turbo off.
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

fazza81 wrote:That was only in testing. normal driving is up to 3000 - 3500 and if you accel had it is still boosting over 15psi time to pull the turbo off.
Yeh I would be careful taking it to 5000rpm, those things hate being revved the crap out of (and you don't have no power up there anyway)
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

HotAe92 wrote:(and you don't have no power up there anyway)
i found mine was good up to 4000rpm and then there was no point pushing it any further.. 5000, no point at all
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests