Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4inch lift, rolling rear diff up to stop uni vibration
4inch lift, rolling rear diff up to stop uni vibration
I've put in a 4inch lift and I'm getting a vibration from the rear driveshaft at around 100km/hr.
So I'm going to roll the rear diff up slightly to fix this but I wont be buying adjustable top and bottom control arms, I'm going to sleeve the originals.
Just wondering if anyone took note of how much longer they made the top control arms and shortened the bottom control arms. I was thinking of trying 10mm.
So I'm going to roll the rear diff up slightly to fix this but I wont be buying adjustable top and bottom control arms, I'm going to sleeve the originals.
Just wondering if anyone took note of how much longer they made the top control arms and shortened the bottom control arms. I was thinking of trying 10mm.
Re: 4inch lift, rolling rear diff up to stop uni vibration
i've got a 94 rx 4.2d and i get a vibration at low speed (just after take off) its got a 4" lift and 33s witrh adjustable panhards, put a new tailshaft in and its better maybe adjustable upper and lower arms might help? any reply gratefully recieved351ciofgrunt wrote:I've put in a 4inch lift and I'm getting a vibration from the rear driveshaft at around 100km/hr.
So I'm going to roll the rear diff up slightly to fix this but I wont be buying adjustable top and bottom control arms, I'm going to sleeve the originals.
Just wondering if anyone took note of how much longer they made the top control arms and shortened the bottom control arms. I was thinking of trying 10mm.
tail shaft vibration
The angle of the universals need to be equal to prevent any vibration!!
So the angle of the shaft out of the gearbox to the tail shaft needs to be the same as the angle of the drive shaft into the pinion shaft on the rear diff.
I can email you an autocad pic if you like. Email me and i can send to you.
steven.coleman@hazelwoodpower.com
So the angle of the shaft out of the gearbox to the tail shaft needs to be the same as the angle of the drive shaft into the pinion shaft on the rear diff.
I can email you an autocad pic if you like. Email me and i can send to you.
steven.coleman@hazelwoodpower.com
Re: tail shaft vibration
Thanks but I do understand the theory, what i was asking if anyone had already done it for a 4inch lift, and measured how much they had to lengthen top arms and shorten bottom arms.steveothedevo wrote:The angle of the universals need to be equal to prevent any vibration!!
So the angle of the shaft out of the gearbox to the tail shaft needs to be the same as the angle of the drive shaft into the pinion shaft on the rear diff.
I can email you an autocad pic if you like. Email me and i can send to you.
steven.coleman@hazelwoodpower.com
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Why would you want to lengthen the uppers and shorten the lowers this is going to make it even worse for vibration.
The pinion needs to be lowered not raised.
The pinion needs to be lowered not raised.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Yeah sorry guys I meant make the lower arms longer, top ones shorter.
I ended up doing it last night, but only made the bottom ones 15mm longer, left the top ones alone, looking forward to a test drive today.
I ended up doing it last night, but only made the bottom ones 15mm longer, left the top ones alone, looking forward to a test drive today.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
If you went REALLY far with it you could run the uni's 'broken-back' and they would cancel each other out perfectly.SuperiorEngineering wrote:Why would you want to lengthen the uppers and shorten the lowers this is going to make it even worse for vibration.
The pinion needs to be lowered not raised.
hands and mums dont count!!!
I understand the theory you are talking about but i wonder in the real world if it would work okay.bj on roids wrote:If you went REALLY far with it you could run the uni's 'broken-back' and they would cancel each other out perfectly.SuperiorEngineering wrote:Why would you want to lengthen the uppers and shorten the lowers this is going to make it even worse for vibration.
The pinion needs to be lowered not raised.
The reason is if you set it up "broken Back" for driving on the road when you get articulation or drop in the suspension the pinion angle will go upwards and as we know the cardin joints have less travel than unis so i would guess that you will bind up the pinion before maximum travel causing it to fail.
This may work on a long link comp truck or leaf spring but i would doubt it will work on a nissan?
I could be wrong .
It would be good to hear from someone that has done it on a street driving nissan.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
I agree with Superior Engineering, I put adjustable upper control arms in my SWB and shortened there length to tilt the pinion down, I used a magnetic angle gauge from bunnings $30, on the drive flanges to get equal angles thus the pinion angles will be equal aswell. No more vibration. I will also be getting ajustable low control arms for strnegth and more ajustability. If you get snake racing arms they are ajustable on the vehical.
You also have to rotate your spring perches which is a much bigger job than just running them parallel.SuperiorEngineering wrote:I understand the theory you are talking about but i wonder in the real world if it would work okay.bj on roids wrote:If you went REALLY far with it you could run the uni's 'broken-back' and they would cancel each other out perfectly.SuperiorEngineering wrote:Why would you want to lengthen the uppers and shorten the lowers this is going to make it even worse for vibration.
The pinion needs to be lowered not raised.
The reason is if you set it up "broken Back" for driving on the road when you get articulation or drop in the suspension the pinion angle will go upwards and as we know the cardin joints have less travel than unis so i would guess that you will bind up the pinion before maximum travel causing it to fail.
This may work on a long link comp truck or leaf spring but i would doubt it will work on a nissan?
I could be wrong .
It would be good to hear from someone that has done it on a street driving nissan.
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Who is online
Users browsing this forum: No registered users and 0 guests