Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HELP wheel bearings

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 52
Joined: Mon Nov 24, 2008 5:15 pm
Location: australia

HELP wheel bearings

Post by vitara guy »

dose any one no how to remove the wheel bearings from my front hub off a 1990 vitara and if they need to be pressed is there any one in western sydney how can do this and it is a bit ergent.
thanks
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

If they have not been changed in a long time and the grease is all dried up they can be really tight within the hub and hard to get out. If you are talking about getting the collars out they can be knocked out with a hammer and punch, that said I have broken punches before trying to knock them out. Putting the new ones in can be done by using the old collar to get it in as straight as possible.

The Job is not that hard, having the required tools will help though.
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Posts: 52
Joined: Mon Nov 24, 2008 5:15 pm
Location: australia

Post by vitara guy »

yer well i have been belting away and nuthing is moving
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

vitara guy wrote:yer well i have been belting away and nuthing is moving
that's a classic case of hammer not big enough.
Top
Posts: 179
Joined: Sat Jun 14, 2008 9:43 pm
Location: Shidney

Post by RockHopper »

Should be able to get it out with a hammer and chisel. If not, get a die grinder in there and carefully grind through the collar with the die grinder to get it out
Top
Posts: 52
Joined: Mon Nov 24, 2008 5:15 pm
Location: australia

Post by vitara guy »

hey problem all fixed got it pressed out today
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest