Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Leaf over conversion?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 17
Joined: Mon Jan 26, 2009 10:03 am
Location: Townsville, QLD

Leaf over conversion?

Post by J0RDY »

hey guys,
I have been checkin out this site for a while and noting a few tech heads amongst the crowed. I own an 88 Gq and am sick of it being so low, sitting on the leafs it was born with. i have heard of a spring over conversion and am wondering if anyone has done it using different manufacturers parts (if they fit or modifying them in any way). i know i need a mod plate and have done a search but have not found anything. Has any one done it with some photos they could share.
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

if you have leaf sprung gq maybe a coil conversion ??
get all the parts of another gq etc and turn yours into coils
im not 100% how easy that is but im assuming it would be better than a spoa
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Top
Posts: 14
Joined: Wed Sep 12, 2007 4:49 pm
Location: melbourne

Post by missinnissin »

leaf over is illegal in most states so you will have to check out local regs.
it would be far easier to go to wreckers and get coil bits as most gq's are coil not leaf suspencion
Top
Posts: 51
Joined: Fri Mar 31, 2006 5:30 am

Post by Tony WestOZ »

The leaf and coil chassis are different. There is quite a bit of work to do the conversion.
If your on the original leaf springs they are probable sagged quite a bit and need to be reset or replaced. There use to be after market sets available with a 2" lift.
Top
Posts: 23
Joined: Thu Oct 30, 2008 3:45 pm
Location: Brisbane

Post by MKNUT »

why don't you just by cheap gq wagon, rip the cab off and put yours on.
Or you could just put 2" leafs, 2" shakles and 2" body lift
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

ive just made coil helpers for mine till i get new springs
works a dream
the rears where sagging more and more and now the whole things feels like a new car
just need to do some flexin to see if it has impeaded on that but so far so good
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

by a GQ chassis/rolling gear, sell your rolling chassis and put your ute body on the chassis, its then classed as a rebody and only requires a mod plate. where as pasting on spring mounts etc. needs engineering and has a good chance of getting knocked back if not perfect.
turbos are nice but i'd rather be blown
Top
Posts: 17
Joined: Mon Jan 26, 2009 10:03 am
Location: Townsville, QLD

Post by J0RDY »

yeah ok guys, you've talked me out of it. But i cant see any point on putting an old cab, with a bit of rust on a newer chassis. i think i might just hold out and save for a whole new truck. Thanks for your opinions
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests