Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer case breather 1.3

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

transfer case breather 1.3

Post by meads02 »

I'm currently fitting breathers to my diffs, gearbox and trans case. What has everyone used to get a hose onto their trans case? There doesn't seem to be enough length to get a hose on whats left after the cap is popped off.
Top
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

Post by Pyrotech »

i have put a screw up type hose clamp on it, its alittle fiddly, but once its on there, its all good
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

I've done this too but the better option is to tap the case for 1/4"BSP and put a proper barb in it.

I did this as a quick fix once, and after a highcounty trip with river crossings, drained about 1/2 a litre of water out of my case because the hose came off.

The steel insert that has the cap on it is just a press fit - It comes out pretty easy. The hole in the alloy case is almost exactly the right diameter for a 1/4" BSP tap.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

it would definately be the better option tapping and using the barb if the case wasnt allready together,under my car and full of oil.Id like to do the barb idea but will probably go the hose clamp just to save time,aslong as i can make it stay on.
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

i have used a thin walled hose and a good cable tie. its worked so far.
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

i ended up using a piece of plastic which stepped up from one end being small enough to fit into the trans case then up to a larger diameter to fit inside the hose. i hose clamped the hose end but i just siliconed around the plastic where it goes into the trans case. it shouldn't come out as the hose is sitting up against the tunnel nice and snug. i will definitely keep an eye on it though.
Top
Posts: 91
Joined: Tue May 27, 2008 11:05 pm
Location: Perth

Post by Adsport »

i used quality silicone hosing, with a bit of sikaflex on the ridge of the leftover breather fitting after taking the sprung cap off. with a spring type clamp its held on no problems :)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests