Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Overheating issues...
Overheating issues...
Hi guys, just a quik question, wondering if anyone has come across the situation..
I have a 91 Sierra, softtop, And it is constantlly overheating...
Here are the things that i have checked and done...
1) Flushed radiator, and added new coolant.
2) Checked timing..
3) pulled complete cooling system out, and flushed and cleaned.
4) new water pump.
5) pulled radiator out and made sure it wasnt blocked, al ok.
6) after all this i started the engine with the radiator cap off and the thermostat removed and there was no flow through the the top tank..
7)everything flows well when its apart, had the hose goin through the engine, flowed fine.
After all this i have no idea what to do now..
One guy suggested that the head gasket could be on upside down..
Any thoughts will be appreciated..
Thanx.
I have a 91 Sierra, softtop, And it is constantlly overheating...
Here are the things that i have checked and done...
1) Flushed radiator, and added new coolant.
2) Checked timing..
3) pulled complete cooling system out, and flushed and cleaned.
4) new water pump.
5) pulled radiator out and made sure it wasnt blocked, al ok.
6) after all this i started the engine with the radiator cap off and the thermostat removed and there was no flow through the the top tank..
7)everything flows well when its apart, had the hose goin through the engine, flowed fine.
After all this i have no idea what to do now..
One guy suggested that the head gasket could be on upside down..
Any thoughts will be appreciated..
Thanx.
Does it have a fan shroud? These often go missing as they tend to get discarded/broken when clumsy people are working on the cooling system/fanbelt.
If it doesn't have one, get one on it ASAP. It makes a huge difference.
I don't think no visible flow in the top tank is in itself indicative of a problem.
Steve.
If it doesn't have one, get one on it ASAP. It makes a huge difference.
I don't think no visible flow in the top tank is in itself indicative of a problem.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Get a TeeKay test done, this is a test that will indicate if there are any exhaust gasses in the cooling system. Do the hoses go very hard when it overheats? Is the system holding pressure? What condition is the radiator cap in, have you tried another one. Any cooling system leaks?
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Re: Overheating issues...
Blocked or stuffed radiator?? or head gasketc0rrupt wrote:Hi guys, just a quik question, wondering if anyone has come across the situation..
I have a 91 Sierra, softtop, And it is constantlly overheating...
Here are the things that i have checked and done...
1) Flushed radiator, and added new coolant.
2) Checked timing..
3) pulled complete cooling system out, and flushed and cleaned.
4) new water pump.
5) pulled radiator out and made sure it wasnt blocked, al ok.
6) after all this i started the engine with the radiator cap off and the thermostat removed and there was no flow through the the top tank..
7)everything flows well when its apart, had the hose goin through the engine, flowed fine.
After all this i have no idea what to do now..
One guy suggested that the head gasket could be on upside down..
Any thoughts will be appreciated..
Thanx.
Eff
Who is online
Users browsing this forum: No registered users and 1 guest