How hard or easy is it to set a c200 MQ diff up for a spring over ??
from memory one spring plate is actually a part of the cast diff center (I may be dreaming) is it possible to mill the housing to allow a spring pack to be run on top of it ...
The rear is as easy as any other plate steel diff ... make up some perches from 4 mm wall box and weld it on a bit at a time and your good to go (once you have axle wrap issues solved that it) ..
TIA
Guy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spring over MQ diffs
Spring over MQ diffs
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
MKPatrolGuy wrote:Check out V8Patrol's rig in the Members section, he has very detailed pics and explanations on how to do the front diff.
Thanks .. did a seach on spring over patrols ... didn't think to include the members section
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
love_mud wrote:MKPatrolGuy wrote:Check out V8Patrol's rig in the Members section, he has very detailed pics and explanations on how to do the front diff.
Thanks .. did a seach on spring over patrols ... didn't think to include the members section
No probs.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Fark .. That is a great writeup ... even I can follow it ...
My only question would have to be what is a DC welder ?? wold that be like using 2 or 3 car batteries??
I am reasonably proficient with an arc welder and have access to a pro welder (My bro is DLI certified) if needed ...
By the look of it though it is not all that scary ... (no harder than any other spring over really) a bit fiddlier but not harder ...
My only question would have to be what is a DC welder ?? wold that be like using 2 or 3 car batteries??
I am reasonably proficient with an arc welder and have access to a pro welder (My bro is DLI certified) if needed ...
By the look of it though it is not all that scary ... (no harder than any other spring over really) a bit fiddlier but not harder ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
God of Magnificant Ideas!
The DC welder has differant welding properties to a AC welder, and I wont bore you with teck shyte....
The most noticable thing when using a DC welder it the fluent flow of the arc, it is also a far more controlable arc, but the only reason I reccemend the use of a DC welder is it doesn't need "peening" once the weld is completed.... thats a huge time factor for me and time = money !
Get ya brother to do the hard welds like the new spring pearch to the diff housing and then the knuckle ends after the twist.... piece of mind if your a tad unsure.... no doubt you can handle the rest !
Your brother is DLI certified ..... he will probally have acess to a DC welder but if not a AC will be just fine, he can also explain the differance between the 2 types of welders if your really interested.
couple of pics of the "red box" << nickname for the unit I use !
The model number ... "1500" is probably more related to the price of these welders .... yep they are as dear as poision !
The 1/2 drive is there to give you and idea of the size.... as for the weight its around 3 kgs with leads attached !!!
They usually come with a TIG option and leads/regulator etc.. very handy for alloys, and stainless.
Kingy
The most noticable thing when using a DC welder it the fluent flow of the arc, it is also a far more controlable arc, but the only reason I reccemend the use of a DC welder is it doesn't need "peening" once the weld is completed.... thats a huge time factor for me and time = money !
Get ya brother to do the hard welds like the new spring pearch to the diff housing and then the knuckle ends after the twist.... piece of mind if your a tad unsure.... no doubt you can handle the rest !
Your brother is DLI certified ..... he will probally have acess to a DC welder but if not a AC will be just fine, he can also explain the differance between the 2 types of welders if your really interested.
couple of pics of the "red box" << nickname for the unit I use !
The model number ... "1500" is probably more related to the price of these welders .... yep they are as dear as poision !
The 1/2 drive is there to give you and idea of the size.... as for the weight its around 3 kgs with leads attached !!!
They usually come with a TIG option and leads/regulator etc.. very handy for alloys, and stainless.
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
God of Magnificant Ideas!
arc welder
I have a welder called a pulse arc and it welds bloody nice. Have you guys heard of that one?
Who is online
Users browsing this forum: No registered users and 6 guests