Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

16X10 rims on 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 308
Joined: Wed Feb 11, 2004 4:51 pm
Location: Adelaide, South Australia

16X10 rims on 80

Post by slowLux »

Some rims nice rims have come up cheap, theyre 16x10 so pretty fat, would these be likely to rub on my guards at full flex n whatnot? Cause i beleive they will stick out the guards a little? Thats with 305 MTZ's and a little bit of lift. At the moment i have the mtz on stock gxl rims and have no issues whatsoever, how much of a difference will fatter rims make to things, wear and tear etc

cheers for any replies
80 GXL
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

i have 16x10's on my 80 with 315 mtr's and they only rub on the front slighly. The back however i dont know, mine's a ute now so i have no clearance issuses.

Grant
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

I had 16x10 on mine with 33"s on mine, (4" lift) they rubbed a little on full compression, this was mainly because of a wider offset.
I now have 35"s on 16x8 with no rubbing at all.
I found i had problems with beads leaking on 16x10 too
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests