Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will warn 6hp motors work on early models of highmounts

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 129
Joined: Tue Apr 01, 2008 8:39 pm
Location: Warrnambool

will warn 6hp motors work on early models of highmounts

Post by GQ4.2 »

Im going to upgrade my highmount from a 2hp motor to a 6hp warn motor, will these 6hp motors fit or will only the 4.5hp motors fit the older model highmounts??
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I've done this and they do fit. This said, I've not run it yet.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Contact:
Contact Draven

Post by Draven »

I believe they fit fine, but you may need to change a cog inside the tophat from a keyway to a spline. To fit the new motor.
I do Web Hosting!
Http://www.ingenuity.net.au

Check out my 4x4 blog!
http://www.monster4x4.com.au/
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Draven wrote:I believe they fit fine, but you may need to change a cog inside the tophat from a keyway to a spline. To fit the new motor.
I had to this to fit my new 4.6hp.
Top
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

Yep, just get the gear that goes on the motor to suit.

The early motors had a keyway on the shaft, the 6 horse has a spline.

The gear does not cost much form anyone who sells warn parts.
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

just make sure your battery/charging system is capable of meeting the extra demand.

A 6hp motor gives bragging rights but also requires more battery power to run and may show up a weak battery whereas the 2.5 would be happy to continue running.
Warn - Dont leave home without it
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

2 or more battery's will fix that ;)
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

how would you tell if its early or late models??
WITH OUT pulling it apart
michael
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

Towards the bottom of this page http://www.pirate4x4.com/tech/billavista/8274/ it shows the serial numbers to which model you have.

Grant
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

they work fine, i have an early model high mount with a 6hp on it
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest