Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone use a LJ50 as a daily driver?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 125
Joined: Sun Jan 25, 2009 11:35 pm
Location: Astrally projecting myself into your mums bedroom

Anyone use a LJ50 as a daily driver?

Post by The Prophet »

I can get a mint (Body and running gear immaculate) LJ50 with the org2stroke in it for $3500, as i already own X2 1.3L zooks for the bush im tempted to get it as a daily driver but i sit on 100 for about 15mins to and from work everyday,
Will i just blow it up or can you make them sit on 100?

You dont see to many 2strokes getting around anymore and its way to good to sell to someone thats going to root it so im even thinking about buying it as a weekend cruiser for something different.
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

They will sit on 80 all day long 100 is pushing it they will get there but only as a quick squirt down hill pref with a good wind pushing you.
Theres not alot that can be done with them to make them go faster , though i have seen a few early corolla 1.1 or 1.2 engines in them and beleve they will do 100 then.
There are 2 ratios for the transfers not sure which is which poss even the lj80 might be a different ratio i know the lj80 has a different ratio between hard top and soft top may even be worth looking further into.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

I drove one as a DD for some time (6-8 years).
Not as economical as you might think. best was about 32 mpg at 90ish kph. At 100 it dropped to 20.
Some work can be done on the motor; particularly to the exhaust. The standard expansion chamber is garbage. The stock carby is ok, but clean up the reed valves a touch. I ran triple mikunis on my second one. went good but sucked juice (15mpg)
Run 7.00x16 radials.
One of those truck type bonnet mount wind deflectors make huge improvement to the "aerodynamics"
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Posts: 64
Joined: Thu Mar 13, 2008 8:35 pm
Location: ipswich

Post by 3 cyl »

The LJ 50 hi range is 1.714, lo is 3.013. LJ80 hi is 1.562 lo is 2.57. The 2 stroke will pull the LJ80 gears but won't really be faster as it won't have the power to rev (something they need to do to go anywhere). A 1 litre front diff will also fit the LJ50 rear but same problem. 80 k's is all you should run it at for any length of time as otherwise rings suffer too soon. Back in the 80's I drove one 140 km's each day no prob's to work and back but found it just as hard on me as the LJ. IMO they're better balanced and cooler with the 2 stroke. I've driven mine 220 k's each way to Landcruiser Pk a few times but that was before I had a trailer. A mate and I have them, Lockrights front and rear as fun wheelers and you'd be surprised where they go.
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I was just speaking to a block the other day who claimed to have a motor for one he used to own that he gave to his son. His son put a petrol motor in it. He said he got a fair bit of poke out of it with different carb, reed mods, deck hight mods and exhaust mods, reckoned it used to fly.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

I have a mate who had one a few years ago, got the $hit$ with it being slow and stuffed a 10a rotary engine in it, apparently it had some go fast porting in it and had some special seals not the original ceramic ones (IIRC) Prolly expensive, but would be fun imagine doing 150 kmh in an LJ :shock: :shock: :shock:

It would need a drag car parachute to slow down, God know the brakes would be stuffed after one stop from 150. :twisted:

Dano.
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

dano80 wrote: but would be fun imagine doing 150 kmh in an LJ :shock: :shock: :shock: Dano.
Having butchered a couple of 50's yonks ago, I'd hesitate to recommend this to anyone.

They just aren't cut out to go fast....... brakes - your joking, handling - your joking, ride quality - buy a kidney belt. They are unstable stock, extra power makes them lethal.

If you listen really carefully, even to a stock LJ50 you can hear it planning to kill you. ;)
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

Yup, doing 105 kmh down the highway in my LJ80 was enough for a change of jocks.....especially when you jump on the picks and it always swerves a different way.....should have done a disc brake conv.

Dano
Posts: 125
Joined: Sun Jan 25, 2009 11:35 pm
Location: Astrally projecting myself into your mums bedroom

Post by The Prophet »

Thanks for the replys i dont think ill bother getting it as a daily driver but im still thinking about getting it as a weekender, The only thing thats putting me off is i'll have to pay 4 rego's if i get it :cry:
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

i would simply LOVE an old LJ... they just have so much character!

if i got one though i'd keep it bog stock, prolly spend money on restoring it infact... i just like the idea of it =)
The worst thing about censorship is ███████.
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

alien wrote:i would simply LOVE an old LJ... they just have so much character!

if i got one though i'd keep it bog stock, prolly spend money on restoring it infact... i just like the idea of it =)
x2
[color=green]Vote Earth[/color]
Posts: 486
Joined: Sun Oct 14, 2007 5:45 pm
Location: Perth, WA

Post by Lil'Loki »

If I remember rightly… Many years ago I saw a fibreglass body kit of a Willy's Jeep which was made as a replacement for rusted out Sierra shells. Can't remember where I saw it, or what the cost was.

It would be cool to have a similar thing of the LJ's as a replacement for a Sierra shell. :cool:
www.auszookers.com
Posts: 51
Joined: Sat May 01, 2004 5:47 pm
Location: GREECE / RHODES ISLAND

Post by Donald2 »

Lil'Loki wrote:If I remember rightly… Many years ago I saw a fibreglass body kit of a Willy's Jeep which was made as a replacement for rusted out Sierra shells. Can't remember where I saw it, or what the cost was.

It would be cool to have a similar thing of the LJ's as a replacement for a Sierra shell. :cool:
I think this is what you re looking :)

http://www.weiss-design.de/kunstofftechnik/index.html

Image

Its from fibreglass
Posts: 486
Joined: Sun Oct 14, 2007 5:45 pm
Location: Perth, WA

Post by Lil'Loki »

That doesn't ring a bell… But do they do that LJ to fit on a sierra chassis?

If only I could speak/read German :cry:

Edit…

Looks like they do
http://www.weiss-design.de/kunstofftech ... .main.html
www.auszookers.com
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

this thread needs more pics of LJs =)
The worst thing about censorship is ███████.
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

alien wrote:this thread needs more pics of LJs =)

Image

Image
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Post by sloshy »

Some old pictures, this thing looks way differant now.
Image
Image
Image
Image
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

GRPABT1 wrote:I was just speaking to a block the other day who claimed to have a motor for one he used to own that he gave to his son. His son put a petrol motor in it. He said he got a fair bit of poke out of it with different carb, reed mods, deck hight mods and exhaust mods, reckoned it used to fly.
You use boyson reeds out of a suzuki,And try to get a set of gt 550 suzuki waterbottle carbies .1975 i think. put a set of expansion chambers, custom made ;) But you have to make a manifold.
How do i know this.Back in 1977 i did this to mine,sorry no pictures lost them in the floods a few years ago :cry:
Last edited by St Jimmy on Tue Mar 31, 2009 3:40 pm, edited 1 time in total.
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Just in case you LJ fans missed it, there's a hella sweet LJ build on pirate.

http://www.pirate4x4.com/forum/showthread.php?t=728527

:cool: :cool: :cool:
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Posts: 31
Joined: Sun Nov 23, 2008 8:38 am
Location: melbourne

Post by casbro »

Image
Image
Image
Image
Yep i like em' too!
Don't drive it on the road! the speedo has a redline at 70k's
Coolest suzi ever made, ;) i'll miss mine
Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests