Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo timer installation

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 365
Joined: Mon Aug 18, 2003 1:03 am
Location: Perth

Turbo timer installation

Post by Shark »

Hey guys i have recently bought a no name brand, typre r or 5 r racing, ebay jobby turbo timer, from cashies

It was the right price but it comes with no instrcutions on installation and was wondering if the colours of the wires were a generic thing like most car head units..

It has 3 say 3mm wires, blue, yellow and red and 2 fine say 1mm wires black and brown..

Anyone know what goes to what??? Any help will be greatly appreciated...
Looking for a car
Posts: 6
Joined: Sat May 20, 2006 1:29 am
Location: SE Melbourne

Post by secrt »

matey

generally turbo timer wiring goes as follows

red - constant 12v
blue and yellow - ignition wires, some cars have 2 ignition wires some have 1
black - is earth
brown - connects to the handbrake light so when u put the handbrake down, the timer shuts off to prevent theft

best option with the blue and yellow is if you have 2 ignition wires then 1 to each, if you have one, you can just tap both into the same wire.

hope this helps and good luck with it.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest