Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Engine/trans GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 71
Joined: Mon Jan 16, 2006 6:51 pm
Location: Chch-NZ

Removing Engine/trans GQ

Post by Clarkie »

Can the engine/trans (TD42) be lifted out as a complete unit inc transfer?

I was thinking Remove Rad/fan/crossmember/gear lever etc and lift out as complete unit.

If its a real bitch I can split the trans/engine

Shane

Cheers
Safari LWB Hi-roof whale,TD42 with DIY turbo,4" lift,35" BFG's,factory locker + winch.
Needs Jenny Craig...
Top
Posts: 104
Joined: Fri Apr 11, 2008 10:34 am
Location: Bendigo, Victoria

Post by narnturbogq »

I'd be splitting the engine and box, the gearboxes are so heavy it would be hard to get the balance to get it out. We just pulled my mates engine and box out and we didn't even bother trying to get them out as one.
Good luck
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

yeah, pull the box off it, the transfer and g/box is heavy enough to deal with plus its way to long to easily pull out of the engine bay
Top
Posts: 49
Joined: Sun May 07, 2006 7:40 pm
Location: Hurstbridge, Melbourne

Post by dogeatdog01 »

When I was stripping all the parts out of my old SWB GQ I pulled the box and motor out as one unit. Mind you the grill and rad were removed prior.
I wasn't worried about denting the engine bay / trans tunnel at the time as the shell was stuffed.
Yes, it is heavy and awkward to remove.
1991 Nissan Patrol SWB 3" King Springs / Rancho 9000X, 2" Body Lift, Cheezy Winch Bar, Warn M8000 winch, Drop Boxes, 35" Baja Claws
Top
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

just pulled out a 2.8 with gearbox and transfer as 1, WHAT A C$NT !!!!

wont be doing that again, swear jar sent me broke.

but we only had 1 trolley jack so taking gearbox off by itself would also have been a job..
beer gimme gimme ! ! !
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 132 guests