alien wrote:put some flashing LED's in there with a perspex cover... all the cool kids are doing it.
Awesome reply!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Filling a hole some dumb s@#t cut out. PIC added!
Moderators: toaddog, TWISTY, V8Patrol, Moderators
It shouldn't but neither should most patrols.LOCKEE wrote:Will a VS box be immersed in bog holes, have rivers flowing over it, buried in snow or sand?coxy321 wrote:We had to patch up a hole some stooge cut into my brothers VS SS bellhousing (angle grinder!). We got some alloy chequerplate, cut it about 5-10mm oversize, shaped it, then attatched it using some oil resistant silicone and four self drilling screws.
Passed RW inspection at a super fussy dealership no problems.
The bellhousings on most cars are not water or airtight by any stretch, he did put silicone on it, so I would feel that it would be quite sufficient for offroad work. Even though it is not going offroad!
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 3 guests