Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hi pinion in rear

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Contact:
Contact killalux

hi pinion in rear

Post by killalux »

just a quick question, i know hi pinions are not stronger in the rear but are they any weaker, want to use it to get rid of driveline vib and get the shaft away from the rocks a bit more
cheers
steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

cplux from this board was running a 4.88 hi-pinion front and rear 4 a while but i havent heard from him 4 ages so i dunno wot is happening there
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

I think this had been tried before and has always ended in failure.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 183
Joined: Sun Nov 10, 2002 7:05 pm
Location: Melbourne

Contact:
Contact Bundytime

Post by Bundytime »

i have a cheap 4.5 high pinion
Top
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

Contact:
Contact toysuzi

hi pinion 4.5 r&p

Post by toysuzi »

how much is cheap & do u have 2 ????
Top
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

Contact:
Contact toysuzi

hi pinion

Post by toysuzi »

u can use the bundy hi/p or 80s the 80s runs 6cyl gears stronger. 4runner/surf lsd/ hemi fit the 80s centre also, it will get ur tail shaft up 4''
Top
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

Post by cplux »

My rear hi pinion seems to be holding ok, althrough has developed a leak around the diff-housing seal. Havent done too many km's on it but what i have done has been hard (testing out supercharger) I am happy with it especially the awesome ground clearance.
Top
Posts: 39
Joined: Thu Nov 20, 2003 6:30 pm
Location: arlington, texas

Post by hbar314 »

Can I just run the hi pin from the front of the 80? Or is there a difference on the 80s?
83 sr5, lce header, tsl's
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

hbar314 wrote:Can I just run the hi pin from the front of the 80? Or is there a difference on the 80s?


Yes you can.

If it is has a factory electric locker you will need to do some slight mods to the axle housing.

Chris.
Top
Posts: 39
Joined: Thu Nov 20, 2003 6:30 pm
Location: arlington, texas

Post by hbar314 »

did the hi pinion locker come in 4.88s or just 4.10? I seem to only be able to get the 4.10s to pull up at the auto wreckers.
83 sr5, lce header, tsl's
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

4.88s in a high pinion are very rare. Only a few import bundys have them.
You can of course buy aftermarket gear sets for high pinion diffs in 4.88.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 9 guests