Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

T/G hi steer on a 4 runner

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 41
Joined: Mon Oct 27, 2003 10:03 pm
Location: rockingham wa

T/G hi steer on a 4 runner

Post by daniel1 »

any one have any problems with hi steer arms hitting the sump on a com V6 conversion 4runner ? cheers daniel
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

I think you have to mod ya sump to make it fit.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Had to make a reverse sump for my crossover steering to clear.

Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 41
Joined: Mon Oct 27, 2003 10:03 pm
Location: rockingham wa

Post by daniel1 »

yeah i thought it was going to be that way?could you pm me a couple of snaps of your sump for some ideas any help would be great cheers daniel
Top
Posts: 94
Joined: Mon May 07, 2007 5:29 pm
Location: A.C.T

Post by luxembuger »

Hey, here's how I made minein my Lux. 1.6mm zincanneal Tig welded. Obviously the pick up had to be modified also, for this I cut the ends of it off and brazed a copper pipe bent to suit to them.
Image
97 DC lux
Top
Posts: 41
Joined: Mon Oct 27, 2003 10:03 pm
Location: rockingham wa

Post by daniel1 »

cool thanks for the pic ,did you modify the left hand engine mount too?
cheers daniel
Top
Posts: 94
Joined: Mon May 07, 2007 5:29 pm
Location: A.C.T

Post by luxembuger »

Yeah mate, with the Marks kit the mount hung down far too low and on up travel the arms really caned the bottom of the mount. I ended up cutting up the mount and completely redesigning it. Hopefully the pic shows how.Image
97 DC lux
Top
Posts: 41
Joined: Mon Oct 27, 2003 10:03 pm
Location: rockingham wa

Post by daniel1 »

yeah thats awsm mate it did come close to the mount as you said mine is a marks one aswell and has that bent bit hanging down where its been bent! thanks again for your help cheers daniel
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 96 guests