Ok this maybe a " what the hell do you wanna do that for" question. but here goes.
Do any one know if any thing came out with or if wheel manufacturers make a wheel that is less offset that a coily one. from what i can tell the coily had te same offset as the vitara ie 25P The standard sierra rim is 10P and i need some thing around 35 P.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suzuki wheel off sets
i think he means -25mm offset which is not what he is after. the stock 16" rims on my vitara are +10mmdad wrote:danssurf82 wrote:f100 sunny rims, 15x8, about 25 mm positive offset
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Pretty sure Niva rims won't clear the brakes.tanshi wrote:Exactly, i need "inset" rims, ie positive offset. I can get a wide track axle down within the allowable 50mm limit with the right rims. Any one got any niva rims laying around in there sheds? Or know a wrecker with a niva that doesnt take the rims off and trhowthem in a pile?
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
you will find they still have a more negative offset than coily rims.seamsy wrote:yeah mate F 100 rims are the go because they have a centered offset
Ive got a narrow track and run 11inch wide rims but they still fit under factory wide track flares
what about old 1 lire utes or lj's whats the offset on those puppies
They're the same as every sierra - 5p I think, but they're only 4.5" wide.
Niva rims have such massive offset that it's likely the centre will foul the brakes. Might work, might not.
Steve.
PS stock sierras are designed to clear 14" rims.
Niva rims have such massive offset that it's likely the centre will foul the brakes. Might work, might not.
Steve.
PS stock sierras are designed to clear 14" rims.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Factory nivas were all 16X5.5" rims (I think they were 5.5 wide, might have been less)
There were some 15" white 8 spoke rims made with a suitable niva offset, and BWA made 15" alloys in an suitable offset in the 80's.
Many many niva's now have sierra rims on them. They're easy to spot, the tyres hang miles outside the guards.
Steve.
There were some 15" white 8 spoke rims made with a suitable niva offset, and BWA made 15" alloys in an suitable offset in the 80's.
Many many niva's now have sierra rims on them. They're easy to spot, the tyres hang miles outside the guards.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
We have a clubmember who is looking at the same swap for the same reasons.
Are you sure it's still too wide with vitara rims on the LJ? Vitara rims will make the WT track 60mm narrower overall than with sierra rims.
Steve.
Are you sure it's still too wide with vitara rims on the LJ? Vitara rims will make the WT track 60mm narrower overall than with sierra rims.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
My booboo:
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
So that's 30mm overall. I think I'd still try getting it passed like that.
However, as you've done a diff swap, surely you're allowed the stock track width of the new diffs - i.e you're not increasing the track width of the new diffs over their standard specification?
Still, (here's some more probably wildly inaccurate information
) I think there's only 80-85mm difference in WMS width WT to NT (the bible puts it at 3", or 75mm) , so you might still sneak the 50mm through on Vit diffs assuming LJ isn't much narrower than NT (and I don't htink it is)
Steve.
Sierra 15' x 5.5" 10P
Vitara 15" x 5.5" 25P
So that's 30mm overall. I think I'd still try getting it passed like that.
However, as you've done a diff swap, surely you're allowed the stock track width of the new diffs - i.e you're not increasing the track width of the new diffs over their standard specification?
Still, (here's some more probably wildly inaccurate information
) I think there's only 80-85mm difference in WMS width WT to NT (the bible puts it at 3", or 75mm) , so you might still sneak the 50mm through on Vit diffs assuming LJ isn't much narrower than NT (and I don't htink it is)Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Give this bloke a call (its listed as a toll free number!)
http://www.ladaparts.com/
only at caboolture. If they work out the goods, might even be able to get a set off of them.
BTW I checked out a Asia Rocksta at uni the other day, they look about the same offset as early Vitara/Coily, so probably no good.
http://www.ladaparts.com/
only at caboolture. If they work out the goods, might even be able to get a set off of them.
BTW I checked out a Asia Rocksta at uni the other day, they look about the same offset as early Vitara/Coily, so probably no good.
Wheeling on completely wicked angles, without even looking stable.
I have some Kia Sportage alloys. They have huge backspacing (must be 45p or more) but need machining to clear the hub, and then I'm not 100% sure they'll clear the tie rod.
I bought them when I was planning to go 4" overwidth, but other plans ended up meaning that was a bad idea.
Steve.
I bought them when I was planning to go 4" overwidth, but other plans ended up meaning that was a bad idea.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Nope, unfortunately they're packed well away under a huge pile of other stuff, on top of some massive shelves. sorry, It's too hard to contemplate.
Mine are 15".
You don't want them anyway. There's $$$$$$$$$ in machining before there even close to fitting.
I wouldn't be surprised if they are the same as Lada, but the kia wheels will clear the brakes as they are alloys so don't have a funny centre shape or drop well.
Steve.
Mine are 15".
You don't want them anyway. There's $$$$$$$$$ in machining before there even close to fitting.
I wouldn't be surprised if they are the same as Lada, but the kia wheels will clear the brakes as they are alloys so don't have a funny centre shape or drop well.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 73 guests